Jump to content

Spoofty

Members
  • Content Count

    194
  • Joined

  • Last visited

Everything posted by Spoofty

  1. Holley blue for 15 years just ahead of the fuel tank. I hate the noise. Even with long headers, dual 3" pipe and dual 3" Flowmasters I can still hear it at idle. I have a hidden toggle switch wired to it. Makes a good anti theft device.
  2. I always wondered why my 2 barrel 302 had a 9". Some one must have changed it a long time ago.
  3. Wow, mine wasn't that long. Maybe a week. Back then it was a huge difference in price,way less than half, that's why I did it.
  4. I had my gas tank done back in 93. Can't say that I ever noticed anything odd and it's still in the car and doing fine. But I don't think I put my tank back in right away. Can't really remember now though.
  5. Awesome. I recognize that car.:shifty:
  6. Well you could start from stock then adjust it a couple degrees at a time and test drive it. When you drive it make it work hard to see if it pings. High RPM and low. For the low RPM keep it in a high gear at low RPMs and give it some gas. Just don't give it enough to down shift if it's auto. If it pings at all then back off the timing. You'll probably find that it will be around 8-10. I think my stock grande is around 10. My coupe is around 18 but it's highly modified. You usually don't want to go more than about 30 or 32 totally advanced, but depending on your timing light you might not be able to check that.
  7. I just clicked on your name and tried to send you a pm but it said that I couldn't. So I clicked on it again then clicked on send email. So I don't know where it went. Do you have an old email linked to the forum? I live in Winter Haven. Maybe I'll see you at the Mustang show at MOSI next month.
  8. You already made a jumper wire from the battery to the coil and it ran? So the coil is probably fine, but you might have fried either the ignition wire or ignition switch. If the wire is bad you can just run regular wire and use a 12v coil. If you use a 6v coil and run a new wire make sure you use a ballast resistor. That will cut the volts down. By the way I sent you an email. I live about 1 1/2 hours from you. I'm not able to come help you right now but if your still having problem when I can I would be glad to help.
  9. Will anybody be going to the Mustangs and Ford show at MOSI on October 24th? Here's the link http://www.mustangcluboftampa.com/ Unfortunately neither of my 69's are road worthy so I will have to go in my wifes 03.
×
×
  • Create New...