-
Content Count
52 -
Joined
-
Last visited
-
Days Won
4
Posts posted by AusTex70
-
-
-
This weekend I added some 351 numbers to the hood, from NPD, very nice quality, just a PITA to get centered.
Also added the Procomp Hood Scoop PCE106.1007. Iam still using the bottom part of the old air cleaner, the PO hacked it up to fit the Jegs brand distributor. I added a second set of threaded inserts that line up with new Procomp scoop's holes. I still think it's too tall, but it does not bind, so I guess I'll just go with it for now.
I have a Holley Sniper with a 1/4 spacer, and planning to run a Hyperspark Distributor. Hopefully the Procomp air clearer assembly will fit.
-
On 1/10/2024 at 7:36 PM, RPM said:Is the air filter gonna fit with your clearance mod? The air filter sits where the X is marked. At least on mine it does.
I had to use a 13 inch filter. The normal 14 inch won't work.
-
-
Hi Vic, Happy new year back at ya! It does seem like the height of these shakers are all over the place. Mine sits about like yours.
The SpeedMaster Cobra Jet Shaker arrived. Speedmaster79.com Part number PCE106.1007
Summit carries it, as well as a few others. All metal, and great quality. It is shorter, 1/2 shorter? Maybe??From the pictures you posted, maybe I have a 351C shaker? The also PO hacked it up to make the Dizzy fit. I did not want to hack up this new base until I replace that dizzy, so I drilled holes in the old base that matched the new top.
-
I was able to remove the old switch, it actually fell apart in pieces!
While I wait for parts to arrive, I've rigged up a stop light switch I had laying around, and used a band clamp around the steering column.
It's actually working great! Maybe I'll just leave it this way? :)
RPM and 69RavenConv reacted to this -
Vic, Did you ever find a solution to lowing your shaker?
Iam having the same issue and would like my scoop lower. My engine is a 351C, with RPM performer and Holley sniper.
I read that the base for the 429 cobra is 1/2 shorter, I have one inbound.-Mark
-
Iam battling this issue - any udate on this from @demon69
-
-
-
What about a 1970? I guess it would work, but the key is on the column of the 1970, I guess I could move it to the dash?
-
On 10/24/2023 at 4:13 PM, Vicfreg said:This is on my list of things to do - what USB plug did you buy, can you post a link?
-
Here is the final product.. the top pannels are held on with magnets, so I can easily reconfigure it.
Mach1 Driver and RPM reacted to this -
-
-
Due to the fact that he drew the directions on one side, and template on the other, it was a challenge using it.
-
10 hours ago, kblagron said:Thanks, my paint shop was trying to paint mine like yours, and I was pretty sure it wasn't correct, so I had them paint it with the U-shaped stripe. After seeing yours I was thinking that maybe I wasn't right. I have an aftermarket shaker, and wasn't sure either whether the numbers should be on there or not.
What aftermarket Shaker did you go with???
-
On 10/2/2023 at 11:09 PM, kblagron said:I had a question on your hood and shaker. I haven't seen a stripe on the hood quite like yours and also the 351 emblem on the shaker. Was this something the PO did?
The previous PO repainted the car, and did not do the hood stripe correctly. As for the emblem, they also came with the car. I have seen them on some cars, and not others, not sure if they are correct or not.
-
-
On 9/22/2023 at 6:43 PM, TexasEd said:And how much of the carpet lite did your car take? I already have the sound deadening and the mass back carpet but want to add that extra layer.
Design Engineering 050113 Under Carpet Lite 70" x 72" Sound Absorption and Insulation (35 sq. ft.)
-
Yes - is that your kid!!! ;)
-
While I waited.... I took care of some surface rust then painted the floor with some Eastwood rust encapsulator.
Then I did the following for heat and soundproofing.
1. Sound Deadner - pick your favorite brand. I had some left over from a past project.
2. Decoupling - I used "Design Engineering Under Carpet Lite" (Carpet Lite)
3. ACC's Essex Carpet with the Mass Backing. It's also molded, and worked great. (Mass Backing)Also, If your going to tackle something like this - do yourself a favor and purchase 10 inch heavy duty scissors, they cut thru all these products, and made the carpet install a breeze.
-
-
Nice trunk set up, please share some details.
What did you do to/for your Mustang today?
in 1969-70 Technical Forum
Posted · Report reply
Loaded up a custom tune for the Sniper unit, then went for a drive with the local Mustang Club.
Did not realize the route was going to take all day, ended up putting 225 miles on the car!