Over the winter i hve been doing some work. One of the projects was replace the what were probably original rubber flex lines for the brakes. Last summer ( My first with the car) the brakes worked perfectly.. During the change I discovered tahat some P.O. had "spliced" the line to the rear brakes with a brass compression fitting. I relaced the line and installed a correct union and line. One line to the left front caliper was corroded so that was replace. That is all I changed. Now I cannot get any brake pressure. I have bled and bled brakes, good fluid flow, no leaks. The pedal goes to the floor and get a tiny bit of braking action near the floor. What am I missing. Everything worked fine before the change. Suggestions welcome
