Kudos To Randy At MidLife

[Kudos To Randy At MidLife]

THANKS GUYS....I NEEDED TO HEAR THIS......ILL TAKE MY TIME FOR SURE AND IF I HAVE ANY PROBLEMS PAINLESS HAS A NUMBER TO CALL ....PLUS YOU GUYS ALWAYS HELP 

THANKS FOR THAT AHEAD OF TIME!!       I WONDER IS RPM BOUGHT MIDLIFE THAT BOTTLE OF WHISKEY YET??????

ED

 

[Kudos To Randy At MidLife]

HA HA ........i like the location you have listed    peoples republic of kalifornia.......it fits so well out there.......i always tell people i refer it as another country.....  and mabey we should just go ahead and give it to mexico and make them happy???     im bad today!!!!!   must be the full moon!!

   well im glad you had an easy problem to fix!!    i have a 70 coupe that i have to put in a new wiring harness i bought from painless...ill be doing that in a couple of months so i will 

have my hands full ...as i have never put one in .....so it will be interesting!!! 

[Kudos To Randy At MidLife]

midlife you saved the day for rpm.....i think he needs to send you a bottle of your favorite whiskey!!!!      tell him to pull out some of that stimulus money!!

ha ha 

 

 

ed 

[new brake system - replaced everything-what is the best way to introduce new brake fluid?]

thanks everyone....... i have heard lots of good things about the mighty vac so i will see what happens with that....but i may try gravity bleed first ....i will watch for the bubbles when pouring

from the bottle........   thanks

ed

 

 

[new brake system - replaced everything-what is the best way to introduce new brake fluid?]

THANK YOU BOB     I THINK I AM GOING TO BENCH BLEED THE MASTER....THEN GRAVITY BLEED AND THEN USE MY MIGHTY VACCUUM TOOL I BOUGHT......AND SEE WHAT HAPPENS...

  ED

 

[new brake system - replaced everything-what is the best way to introduce new brake fluid?]

hey guys i need sine advuce,,,, 1970 mustang coupe  all manual drum brakes....i replaced everything from master cylinder to lines ....etc......  now i have to put in the brake fluid for the first time

(going with dot 5)....and need to know   - which is the best way to bleed them....i plan on using a mityvac but should i gravity bleed them first (since evreything is empty)  ...ill bench bleed the master first...but eveything from the line distributor to the wheel cylinders is empty........      i have never replaced a whole system before so i want to do it right the first time......

thanks

ed

 

[C-4 TRANSMISSIONS]

got help .....engine was sitting too low......  now  its all ok...........thanks  anyway

ed

 

 

[C-4 TRANSMISSIONS]

IM HAVING TROUBLE WITH PUTTING NEW TRANSMISSION COOLING LINES ON.....I HEAR THEY ARE THE SAME FOR ALL C-4 SIX CYLINDERS BUT ONE LINE SEEMS TOO 

SHORT......

ED

 

[C-4 TRANSMISSIONS]

DOES ANYONE KNOW IF THE C-4 TRANSMISSION ON A 250 SIX CYLINDER ENGINE IS THE SAME FOR THE 200 SIX CYLINDER ENGINE??

AND I THINK THE BELL HOUSING ON THE C-4 250 SIX MAY BE THE SAME ON THE V/8 

??

ED

 

[Rear Seat Question]

i have a coupe also.........so i have no answer ....... ill wait to see what response you get!!    

ed

 

[70 BLOWER RESISTOR WITH NON A/C]

THANK YOU FOR CONFIRMING THAT......ILL BUY A NEW ONE NOW........MERRY CHRISTMAS!!

ED

 

 

[70 BLOWER RESISTOR WITH NON A/C]

I WILL THANKS.......I HEARD ON SOME REVIEWS FROM THE SCOTT DRAKE RESISTOR    (FOR THE A/C CAR)    WORKED FOR THE NON-A/C CARS LIKE MINE......A COUPLE OF GUYS SAID IT MATCHED THEIR OLD ONES THEY TOOK OUT....SO I WILL CHECK THAT ONE OUT TOO....

THANKS FOR YOUR HELP

ED

 

[70 BLOWER RESISTOR WITH NON A/C]

the used resistor i am going to use is rusty and ill evaporust it to clean it up....  i would rather put a new one in it since the box is a repo new one...........and the blower motor is new...

and the wiring will be new   (using painless)......    first harness i am doing so i am trying not to make mistakes.....

ed

 

 

[70 BLOWER RESISTOR WITH NON A/C]

thanks..... ill try it....... the new resistors for sale seem to all be for a/c cars but my old resistor looks actually the same ....i wonder if i could use one of those without any problems??
wonder if anyone else has tried this? 

[70 BLOWER RESISTOR WITH NON A/C]

THE RESISTOR ON A 70 MUSTANG COUPE HEATER BOX HAVE  4 PRONGS FOR WIRES......OR 3 ?  THE OLD ONE ON MY OLD BOX HAS THE 4TH ONE EITHER CUT OFF OR BROKEN OFF FROM AGE.....I HAVE ANOTHER USED ONE ILL PUT ON BUT IT HAS THE BOTTOM FORTH PRONG ON IT.........AND I BELIEVE THE BLOWER MOTOR WIRE GOES TO THAT ONE........??????

MY OLD BOX IS GONE AND THE WIRING SO I HAVE TO FIGURE OUT THE WIRING

THANKS

 

ED

 

 

 

[wiring for blower motor 70 coupe]

THANK YOU VERY MUCH....IT MAKES SENSE....I HAVE THE RESISTOR BLOCK ATTACHED TO THE HEATER BOX AND NOW WILL HAVE TO FIGURE OUT WHICH TERMINAL IT ATTACHES TO......  THIS HELPS....THANKS A LOT...

ED

 

[Is anyone out there?]

we are looking for all those mis-placed trump ballets!!!

[wiring for blower motor 70 coupe]

the car has no a/c so its a simple heater blower motor with a 3 speed switch.......

ed

 

[wiring for blower motor 70 coupe]

i have my dash out put in a new blower motor and repo heater box......wiring being replaced so its half missing......the blower motor has two wires - one goes to ground - the other is the hot wire--where does this hook up to????  i dont see a wire for it in my painless wire kit yet.....am i missing something here??     this has to be an easy one i would think???

thanks 

ed

 

[Explain it to me please !]

MACH 1 RIDER I AGREE WITH EVERYTHING YOU SAID HERE.....IM IN YOUR AGE BRACKET AND HAVE NEVER SEEN POLITICIANS THIS BAD........REMEMBER TO BE A POLITICIAN YOU MUST BE A LAWYER AND TO BE A LAWYER YOU HAVE TO BE A GOOD LIAR!!!!      YES THEY WERE BAD IN THE PAST BUT THEY ARE STRIVING TO GET WORSE EVERY YEAR!

I FEEL SORRY FOR THE GRANDKIDS   WHAT A WORLD THEY WILL HAVE TO DEAL WITH-  THEY WONT HAVE THE HAPPY TIMES IN LIFE WE HAVE EXPERIENCED ....

HOPEFULLY TRUMP WILL GET BACK IN IT AGAIN!!!    HE IS  A GOOD MAN- I KNOW A FEW PEOPLE WHO KNOW HIM PERSONALLY GROWING UP.....

MAKE AMERICA GREAT AGAIN!!!!!!!!!

ED

 

[Who does the best power steering hoses?]

i second dan of chockostang...... he helped me out too......good people.......

ed

 

[BEST DOT 5 BRAKE FLUID TO USE?]

MACH 1.......BILL MURRAY IS A FAVORITE ---  THANKS FOR SENDING THAT!! 

ED

 

 

[BEST DOT 5 BRAKE FLUID TO USE?]

THANK YOU EVERYONE...........I HAVE LEARNED MORE ABOUT DOT 5 ON THIS THREAD.....THANKS........ED

[BEST DOT 5 BRAKE FLUID TO USE?]

MACH 1......I RESPECT YOUR INFO HERE ......I HEAR SO MANY PEOPLE TALK ABOUT YEARS WITH DOT 5 AND NO PROBLEMS AND I HAVE SEEN FIRST HAND WHAT DOT 3 AND 4 DO TO WHEEL CYLINDERS IN A COUPLE OF YEARS......I HAVE TO ADMIT I HAVE NEVER CHANGED MY BRAKE FLUID EVERY YEAR EVER IN ANY CAR .... ITS NOT A HABBIT I HAVE AQUIRED I GUESS.....MABEY I HAVE TO START DOING THAT.....BUT CHANGING DOT 5 EVERY 2 YEARS -WOULDNT THAT BE A BETTER CHOICE WITH LITTLE DRIVING TIME ON MY VINTAGE MUSTANG??  SINCE ITS NOT A DAILY DRIVER ??

   YOUR THOUGHTS?

ED

 

 

[BEST DOT 5 BRAKE FLUID TO USE?]

why not use the dot 5 silicone fluid???   it seems to work well in cars not driven daily..... i hear lots of good things from lots of people who have used it....i knot dot 3 and 4 give you problems after a period of time......   what is your concern?  

ed