jerrycordova93
-
Content Count
15 -
Joined
-
Last visited
Posts posted by jerrycordova93
-
-
-
On 6/17/2020 at 1:47 PM, RPM said:Stick with the K, most manual boxes are plumb worn out. Give Chockostang.com a call, his rebuilt boxes are tits, and pretty reasonable. I've got a Flaming River 16:1 box with around 7k miles that I'll give you a smoking deal on.
Just got the flaming river steering box. Thanks so much!
-
On 6/15/2020 at 1:59 PM, det0326 said:351w no x or h plpe
I just saw you posted this! Thanks so much! Sounds as good as it looks!!! I usually always lurked on this site but have been trying to navigate it more, so saw this days later. Thanks again!
-
21 hours ago, Ridge Runner said:I have a couple of smbk boxes ,not sure of the condition
Waiting to hear back from RPM. I'll let you know, thanks.
-
20 hours ago, RPM said:If I you, I'd stick with the K power box which gets minimal wear. Most F manual boxes are plumb worn out.
What's your budget? I've got a tight 16:1 K box that I'd rather not just give away. I've also got a Flaming River 16:1 box with less than 7k miles that I'll sell for $200 + $20 shipping.
On 6/17/2020 at 1:47 PM, RPM said:Stick with the K, most manual boxes are plumb worn out. Give Chockostang.com a call, his rebuilt boxes are tits, and pretty reasonable. I've got a Flaming River 16:1 box with around 7k miles that I'll give you a smoking deal on.
I messaged you directly earlier today about the flaming river box you have.
-
I messaged you earlier today about it.
-
I appreciate the tip on the worn out box...and I'll message you tomorrow. Gotta figure out the budget.....stupid budget!
-
Anyone out there with a good condition SMB K or SMB F 16:1 steering box they'd be willing to sell and ship? Budget is an issue so hoping for a decent deal(had to put that out there). Must be in good working order. Thanks in advance
-
Anyone out there with a good condition SMB K or SMB F 16:1 steering box they'd be willing to sell and ship? Budget is an issue so hoping for a decent deal(had to put that out there). Must be in good working order. Thanks in advance
-
Oh good! I'm almost done doing the prius install in mine but was afraid that with the quicker steering box ratio, and the prius unit fail safe mode being 50% assist, that it would still be heavy steering at low parking lot speeds.
-
Anyone out there with a good condition SMB K or SMB F 16:1 steering box they'd be willing to sell and ship? Budget is an issue so hoping for a decent deal(had to put that out there). Must be in good working order. Thanks in advance
-
How does the prius unit in fail safe do with the tighter 16:1 ratio box? How's it feel at low and high speeds? I really hope you see this post!
-
On 3/23/2020 at 3:01 PM, ralt962 said:I'm building my 393w and have heads with square ports and ended up getting these same "tri y" headers from Doug's. I would've loved to been able to afford FPA long tubes but budget rules all. Is there any way tou can upload audio of how these sound? I usually love how long tubes sound and have no idea what to expect with these. You'd be my hero if you could! Thanks in advance!
-
So what's the verdict with drilling the holes on the dash? Leave the trim on, or leave it off while using the template? I dont have those trims at all, so I'm stuck if I need them on....
69 351w Distributor, fan, pulleys, Ford intake, more
in Parts for Sale / Wanted
Posted · Report reply
I'd like details on the intake please. Part number if possible. Willing to ship?