Part Time
Members-
Content Count
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Store
Everything posted by Part Time
-
Thinking about relocating my 3rd brake light from the trunk deck to roof top. Any opinions?
-
I started with a flat piece rolled it with English wheel, bent a 1" flange at top to "hook" over the window edge and then rolled the perimeter with rounded bead roller. I have to grind and sand the edge to fit door yet. Then going to add hidden fasteners.
-
Getting closer to finishing the interior. Made my door panel and armrest today. Gonna run 1/4" polished aluminum strip around top with vertical pleats above armrest. Thinking about making a separate panel at bottom similar to where the carpet is on a 69 Mach I. Might put stainless or aluminum in this area instead of carpet.
-
Thanks! Not sure what you're asking but the top of doors are stock. I did put a new door skin on to make up for the difference in height. If this doesn't answer your question, let me know more specifically what your referring to and I will try to answer. I made the mirrors out of 20 ga sheet metal. They house the power controls from my 09. I have transferred everything ( power windows, locks, etc) from the 09 into this build.
-
Thanks for the welcome. Looks like a lot of cool projects...not sure why I never came across your site before?? You are correct, the wheel base is a little different and the body is wider. I widened the quarters and front fenders then split the inner door and widened them. The doors are stock '70 length but are taller than stock. I can post specific pictures of them latter today or you could see the entire project on Mustangs to Fear Forum page. I'm building this car because I prefer the old school look but like the modern conveniences that come with the 09 (drive train, suspension, brakes, lighting, A/C, etc). I love the challenges that go with it and am doing it for fun. After completing the body, I decided not to go with the stock 09 dash and wanted to build the interior from scratch except I'm using a headliner from Mustangs to Fear. My dash is basically done and now I'm working on the rear seat area. My plan will be to wrap a lot of it with leather. I've included a couple more recent pictures of it.
-
I was surfing the web, came across this site and it looks like a lot of nice projects. I will try to post a few pictures of my project. It's a 70 Mach 1 setting on a 09 Shelby gt500. I've got most of the exterior fabrication completed and started making the interior. Hope you enjoy the pictures.