BuckeyeDemon
-
Content Count
2,480 -
Joined
-
Last visited
-
Days Won
45
Posts posted by BuckeyeDemon
-
-
the replacement clutch setup that went in last year is operating and holding well now. i know i'm shifting at 7800+. i also have the throttle adjusted so it's opening all the way. just trying to find the right time in the next few weeks to get it to the track. except for some shock adjustments and removing the tool kit from the back seat, i will track it just as the car is setup for the street.
-
two pics from back in may of 2022 at a local event. My dad drove the falcon and i drove the mustang. it was great to have my dad take a car and have two hot rods there.
-
On 12/26/2022 at 5:22 PM, Machspeed said:My gosh, the Falcon is beautiful too! You don't do anything half-A, man. You still have the Mach?
thank you. i do still have the mustang. it's still my baby :) the 69 mustang just looks so good from any angle.
-
21 hours ago, RPM said:Well I certainly hope it's not your last post. What an outstanding job you do. With the different suspension, how does the Falcon ride compared to the 69 Mach 1?
You live in a gorgeous part of the country. With a couple of good customers you could make some serious cash building top shelf cars. The talent here on this forum is astonishing. And by the way, you look nothing like what I imagined. I figured you were a hard ass looking special forces kind of guy. Not that what I saw was a bad thing. Kudos brother.
thank you. i always thought of myself as a bad ass 6'2", 165 lb biker dude (well bicycler anyways....lol).
the falcon steers easier, brakes better, shifts easier and has an easier clutch than the mustang. the falcon rides flat around the corners, but i don't think that means it handles the corners better. i'm pretty certain if i pushed the falcon at all around the corners that it would be in the ditch. it has no front sway bar and has a rear four link that is inherently in bind on roll or a single side bump. but, i really don't have any interest in finding the limits on the corners of these cars on the street. i will say the mustangs leaf springs with a detroit locker give an interesting feel when in and out of the throttle. great for giving people rides. the falcon rear end is extremely well behaved. i'm sure the 4-link/panhard is the primary reason. maybe the helical differential helps too.
the falcon seats are considerably different as compared to the mach 1 seats.
the clutch in the falcon (Ram Force 10.5" dual sintered iron disc) is slipping bad. and that is with the throttle heavily limited (probably limited to flow about 60%). Mccleod just finished balancing an RXT1200 assembly and should be here in a few days. i hope that resolves that issue and i can get at least a hit or two at the dragstrip this fall.
RPM and Grabber70Mach reacted to this -
last post. i shot a little video in car and also from underneath of the rear suspension.
-
your sensor of the fan activity should be located at the exit of the radiator/entrance to the engine (lower hose). basically, if the radiator (without fans) is able to adequately cool the fluid before it enters the engine, then there is no point in turning on the fans or have them turned up. locating that sensor in the intake manifold will basically have you running the fans more necessary. which of course won't hurt beyond consuming a little more energy/power at certain times.
-
1 hour ago, Grabber70Mach said:That came out great @BuckeyeDemon, I bet it's a blast to drive. I went to an annual show earlier this month and saw this car and thought of yours. Hope you don't mind me posting some pictures of it on your thread. If you don't want me to just let me know and I'll remove them.
thank you.
i really like the 63 hardtop body. i thought the roof looked peculiar when i first saw the pictures (same exact roof as mine) and noticed that the description indicates heavy mods. what a lot of work. very neat description of what they did. always love black too.
Grabber70Mach and RPM reacted to this -
i would say this will be the last post....
interior is finished. i had to make my own carpet. so that involved sectioning areas around the tunnel and sewing it back up.
i probably have around 250 miles on it as of now. i'm blown away, but it's actually easier to drive than the mustang....i was certain it would have been the other way around....
video was the second startup. was cold outside that day....
Mach1 Driver and stangs-R-me reacted to this -
2 hours ago, Machspeed said:Buckeye, did you use the same paint color on the undercarriage for the Falcon as you did on the Mustang? I've looked at both undercarriages on those two projects and it is really hard to tell. Photos don't really capture the true color of things. The undercarriage on my Mach was a gray, wondering if I might get that mix formula from you on your Mach? Thanks!
i did not use the same paint color. they do seem pretty close though. i think i started with an off the shelf color for the mustang. I know I added metallic to that. I may have darkened the color (or maybe i changed the tone of the other gray parts). the gray on the falcon is also off the shelf and not modified though. it's a solid color used for many cars like jeeps and mopars. one name for it is destroyer gray.
-
thanks for the comments. it is still moving along...
-
4 hours ago, Mach1 Driver said:Buckeye, two awesome builds! On the Mach, page 23 you mention the weather pack firewall connector. Do you know the manufacturer and or part number? None of my searches have turned up that connector as seen on page 22. All I've seen are round and awkward looking. Thanks in advance, this build has a reputation as the bible for 69s ;)
thank you.
see below link to the connector.
https://www.summitracing.com/parts/aww-500666
Mach1 Driver reacted to this -
thank you!
-
-
On 8/24/2021 at 6:58 PM, Grabber70Mach said:Wow when you finish the Falcon you're going to have two awesome looking cars. You'll have a hard decision on which one you want to take out for a ride.
thank you. i'm sure the falcon will get driven more in the first year, but the Mustang will always be the special one to me for many reasons. hoping my dad will be able to come down and drive the falcon with me in the mustang. I believe the falcon probably means more to him for his reasons....
Grabber70Mach reacted to this -
16 hours ago, RPM said:Stellar work, on both cars. As bad ass as the 69 is, that Falcon I'd gonna be a beast. If ya want something done right...
Kudos brother.
thanks rpm. that's a very generous statement.
-
-
1 hour ago, JET 445 said:Looks fantastic, is that metallic or solid?.
Thanks. It's solid. I wouldn't spray a metallic or pearl like this...
-
-
-
8 hours ago, JET 445 said:I hope you love masking because you are going to be doing a mountain of it to protect each part through all the painting stages. It's fun right? This is my latest one.
looks great.
i hate masking. I'm also not to worried about overspray in the cabin area (except trunk and dash). i spent several house masking when prepping to paint the cage, just to prevent having to sand overspray from the other surfaces when it's time to final sand those (and prevent dirt from getting blown out from goofy places like the roof area). I spent most of the evening tuesday night masking the cage to prevent it from getting any oversprays....
-
-
15 minutes ago, Mike65 said:Buckeye, the Falcon is looking good. I have a couple questions, where did you get the teardrop hood for the Falcon, & is it fiberglass?, The rear package tray by the rear window is that a stock one you cut to fit around the roll bar or did you make it, if you made it what material did you use?.
the hood was from Crites and it needed work to make it fit (even though many people say they fit great and you can actually see the same problems when they post pictures....).
the rear package tray was simply a new, replacement for a falcon which i then cut the speaker holes and holes/slots for the rollbar.
one side has the pattern in it. the opposite side was smooth (many people seem to use the opposite side instead, but i think pattern looks a lot better and probably doesn't lead to reflections in the window).
i think the material is maybe referred to as fiberboard?
i gave it a very light sand (not wanting to take away the pattern), then applied paint. it had a very rough feel after paint (i think it was the fibrous material wanting to stand up, similar to what wood will do). then gave it a very light scuff with 600 to knock off that gritty feel and then two more coats. it now feels like it wouldn't leave material behind if i took a microfiber towel on it.
-
46 minutes ago, RPM said:A bit of envy going on here. Outstanding work, especially on the stainless. I'll need your address to send a box full of stainless trim :)
i'll pass! wouldn't want to take away from the pleasure you could have! pushing on those dents, sanding for what seemed like hours.....
RPM and Crazyhorse reacted to this -
54 minutes ago, Klutch said:Thanks for the update. Are you saying the Falcons are a dime a dozen or the tractors are a dime a dozen?
That tractor looks pretty spiffy as it is.the old farmall tractors. i spent more on rocker arms than i did this old tractor (and the tires themselves can come close to that in itself).
69 mach 408w build
in Project Progress Forum
Posted · Edited by BuckeyeDemon
add video link · Report reply
I was able to get to the track for a test and tune night for its first three passes.
The launch limiter was set at 3500rpm initially thinking that was conservative, but it was blowing the tires off in the first two gears on those two passes. The car was 100% as I drive it on the street (even tire pressure and shock settings). On the third pass i just took off easy.
Ran almost 135mph on the second pass and 136 mph on the third pass.
I have everything to be legal to faster than 9.99 and 135 except the paper work for roll cage cert and the competition license.