rdm69supercobra

Does anyone have away to decode this number 12397 stamped in the center of cowl Thanks

Thanks Brian 4 your post, I will ck. the CJ reg. Some of the info was taken from Kevin Marti. Again Thanks

About 3 weeks ago I started on a journey to find out if my 69 428SCJ was in fact real. So I joined this forum, and got some good advice ( buck tag # placement for a Dearborn ) Son of a gun, it was right on the right hand side of the radiator support bracket, were a forum member told me it would be. Great, all BUCK tag info. checked out fine ( see my buck tag info. post )The following is the unfolding of a continued uncertainty. After a little research, I started with the BLOCK cast code # c7me-a ( 428 4v / police int. /cj 1967 thru 1970 and ?? 330 cid ) and DATE code behind the oil filter. Talk about difficult, the stamping method Ford used was as archaic as the model T. I tried wiping it down, I shinned the light in many different angles, trying to capture a letter or number but couldn't read the imprint. Finally, I resorted to making some pizza dough and casting a Moulage ( plaster cast ) and was able to extrapolate the bloc date ( Sherlock Holmes ) # 8H22. ( 8 = 1968 H = Aug. 22 = day ) Then Moved on to the STEERING box tag # My car is NON power steering so maybe that's why there was no top line # ?? bottom line on steer box tag # is 8k21b - 8 = 1968 k = Oct. 21 = day and b = 2nd shift. Next was COIL tag # NO - CARB. tag # NO. - REAR END tag # NO. It has some aftermarket parts, Offenhauser Duel Quad, with 2 Carter 750/730 carbs, and a Mallory Unilite. Then I started looking at FE exhaust manifolds and the 390 ( which a member told me my car probably was a 390, from the BLOCK.cast # ) has a 14 bolt pattern and the cj has a 16 bolt pattern, then I checked for OEM 428 cj manifolds, ( c8oe - 9430 -a right side and c8oe - 9431-a left side ) my car has both, and they are completely different than the high pro. 390 gt. You can bet I was relieved that my 69scj, is starting to look like the REAL thing . I'll get back to you when we drop the oil pan and check the CRANK numbers ( 428 has 4 different crank variations possible ) and find out if it's a scj or cj ??? One VERY IMPORTANT thing to remember is the MANUFACTURE YEAR is July to July NOT Jan. 1 to Jan. 1 This understanding will help you determine if these parts fit. My 1969 was built March 11 1969, nine months into the model year, and the DATE code # of Aug. 22, 1968 IS A 1969 MODEL ENGINE. Check out utube " 428cj cougar by the numbers ' westcoastclassiccougar it shows that STOCK part DATE codes are sometimes DATED AFTER build. Check out utube " Ford casting numbers explained " myvintageiron7512 this guy knows fe heads. Information from both of these sourses listed here THANKS hope u found it useful

Was wondering if anybody went to it, and if it was worth the time ?? I was too sick to go THANKS

Thanks for the heads up on your address, and engine size and year. Yes on parts, I'm looking 4 a mach 1 69 ram air hood NOS OEM, and a duel quad ram air scoop period correct ( Mr Gasket ) or maybe something new, and finally I have a NOS OEM boss 302/ 429oil filter adapt with all the trimmings to sell or trade. But not just yet. I'm facing a serious health right now, and barley have a cup to piss in . but keep me posted. Oh what moter is in your sm. blk. ??/

Hi barnett468 , let me explain - I've lived in oc 18 years, never anything but work, now I find myself with tons of time, and knowing nobody, my question was, is it a car club event ( could I attend ) or a mustang thing open to public ( yes, and free ) I was hoping too meet a few like minded folks from this site ?? Well checked out the event, and its been sold out for a while ( $45 ) to enter a car, which I wanted to do, and maybe meet a few of you guys at event. That's all, So thanks much for the heads and the info.

oh that sounds pretty good, do club people bring there cars, and ifso are U.

I have no clue about anything, just joined

Hi RavenConv - It sure sounds like kissing cousins 4sure. yah. They don't call it resale red 4 nothing. It would have been a toss up either red or black, would have made me happy !!!! What small block 351c 351w maybe, did they still use 289 that late ?? R U in So Cal, if so car is in the OC. I've been a ford guy all my life ( its what Dad had ) and taken shit from all back home in New England. This is like I died and went to Ford heaven YAH. Once I change the pan , and get a good look at the lower end, I'll know for sure. I started this org. part chase 2 weeks ago, and the only part so far NOT OEM is the hood, even all lights ,bezels fixtures are Ford, although the last owner removed ram air and added 2 x 750 old school Carter 4.5 pro comp carbs ( Shelby Style) Thanks for the shout out

Does Rome ring a bell for anyone ????