I have a 69 Mustang with a V8. I just got this a week ago and don't know too much about it. This is my first Mustang. The dash lights do not work when pulling out the knob. I took the cluster out and checked all the bulbs and cleaned the connections. I traced down the circuit on the back of the circuit board and applied power to the correct circuit and the lights power up with it grounded with a power probe. I replaced the light switch.what color wire gives power/ground to the cluster? The gauges don't work also. I did look at the wiring schematic in the "HOW TO'S" and it doesn't have a wire color. Any help would be greatly appreciated. There is a LT blue/red wire that had been cut and butt connected back together. I am trying to fix this mess.
