RandyatBBY

January 16

Any one have a measurement for the 1969 mustang side markers in the valance/front, how far down and how far from wheel well opening ?

Thanks in advance

RPM · January 7

20 hours ago, RandyatBBY said:

Looking for a little clamp that goes on the AC cable

Heater Cable Clamp And Screw Mustang 1965-1970 I found one for 13.95 from CJ Poinies plus shipping. I could make one out of stainless steel. any one have a spair to mail for $10. bucks or so?

Good news I found the clamp in my spare parts.

January 6

Looking for a little clamp that goes on the AC cable

Heater Cable Clamp And Screw Mustang 1965-1970 I found one for 13.95 from CJ Poinies plus shipping. I could make one out of stainless steel. any one have a spair to mail for $10. bucks or so?

December 15, 2023

I bolted down a shaker to my efi. It had been sitting on blocks over the efi for the last 4 years. nice to see a dream compleated.

December 15, 2023

LOL! thanks for the consideration.

December 15, 2023

Thanks feel a little dumb at this moment.

December 15, 2023

Too bad no one answered this, I am in the middle of the same job after crossing something and having a melt down durring testing circuts.

December 15, 2023

Question What is the emergency warning switch? iIs it a 69 only thing? or does the 70tie have it too?

December 5, 2023

On 12/3/2023 at 5:44 AM, Vicfreg said:

Pretty sure on the steering column. Used for wiring support. Check the assembly drawings. Pretty sure I have one on my ‘70

I just read that for the part in the first pictures, now I think/hope I can find the spot where it goes.

December 4, 2023

I am begining to wonder if it a 69 only and my 70 body does not use it?

Mach1 Driver · December 4, 2023

On 12/3/2023 at 8:26 AM, RogerC said:

I believe it's part of the steering column support at the pedal support. Pic is 69, 70 probably similar.

Well that is another bracket that I have and figured that was where to place it. I am not sure what it does either.

December 3, 2023

Hi guys back at the mustang I am working to get ready to start it. I have a part that I have a question about. It is a bracket is off a 1969 Mustang coupe 302 3 speed. I was a part of a groupe of parts I had powered coated five to ten years ago. the batch was from the clutch and brake swing arm pedal and assembly. I do not know where it goes or what it does. does any one have a idea? picture is one side and then fliped over. Thanks in advance

RPM · February 21, 2023

shots of the new parts. I hope the new stance looks right.

February 21, 2023

I like the Blue Sea also

February 21, 2023

I had thought of that "mounting to the hood" and decided I wanted it to shake.

I got my new 2 inch dropped spindles , 11 inch rotors, calipers, 15 inch american racing torque thrust D rims and tires.

One of my friends sugested thaat I put a Fuse on the positive line at the terminal incase of shorts to stop a fire. The question is how big to make it? 200amp, 300 amp, 500 amp???? I am thinking about this one.

January 20, 2023

wow a lot of work. I did roll overs in the late 60ties, decided to become a Jeweler. But never quit working on my own bodys. Glad I live in Califorina and bought my 70tie in 88 and has never been out of the garage since.

I would use four come-alongs with body flange clamps to pull the roof down. you may need to cut small reliefs where it needs spreading and not distort other panels.

January 20, 2023

Finaly I got the rear spoiler (the correct one) and installed it. I know it is just gingerbread.

Just taking a breather from the wireing.

RogerC · January 13, 2023

Some real nice work. Mine is going slow too. I only work on it when I feel good. I am all most done with the wireing about 2 weeks of work left on the wire job.