JET 445
-
Content Count
201 -
Joined
-
Last visited
-
Days Won
4
Reputation Activity
-
JET 445 got a reaction from Shep69 in Radiator Level Question
I put a recovery cap on mine with an overflow tank, never have to worry about it again.
-
JET 445 got a reaction from RPM in Bought another Classic Car
It's better than ok, it's freakin awesome.
-
JET 445 got a reaction from bigmal in Mounting Rear Speakers in a 69 Fastback
I used JB weld and glued some sheet metal on the back. It would also help to stick some insulation on the inside of the panel.
-
JET 445 got a reaction from Shep69 in Mounting Rear Speakers in a 69 Fastback
I put mine here, pretty well hidden behind the seats.
-
JET 445 got a reaction from Johns Summer of 69 in Summer (of 69) Project
Fair enough, just keep on to him to get it done in a reasonable time, you don't want this to go on for months or years.
-
JET 445 got a reaction from TexasEd in Brake problems
Do those rotors come in a left hand and right hand pair?, to me that rotor looks like it is on the wrong side of the car, but I have been wrong plenty of times before, lol.
-
JET 445 got a reaction from RPM in Diff Identification
I say keep it, you can get parts for anything if you hunt around a bit, it's not like you will have to rebuild it again any time soon. Rebuild it now and you will probably never need to touch it again.
-
JET 445 got a reaction from Shep69 in What did you do to/for your Mustang today?
Made a custom offset shaker base and used a metal mid plate and scoop giving me a full metal shaker. I had some paint mixed to match the color of the original air cleaner, it looks much better than using spray cans.
-
JET 445 got a reaction from RPM in What did you do to/for your Mustang today?
Made a custom offset shaker base and used a metal mid plate and scoop giving me a full metal shaker. I had some paint mixed to match the color of the original air cleaner, it looks much better than using spray cans.
-
JET 445 got a reaction from latoracing in Rack and Pinion Opinions
I agree, none of the racks are perfect, it's a matter of choosing the best of a bad lot.
-
JET 445 got a reaction from Caseyrhe in What did you do to/for your Mustang today?
To fill the gaping hole that Ford left there and to give me something to stick the insulation on to.
-
JET 445 got a reaction from judithtu2 in what was your thoughts when you first saw your Mustang
I debated the paint color for about 2 years but ended up changing to blue.
-
JET 445 got a reaction from Grabber70Mach in 69 Fastback Wiring Woes
I laid my harness out on the floor, connected the earths to a piece of steel tubing and then tested and repaired all the circuits, then wrapped it and installed it in the car.
-
JET 445 got a reaction from bigmal in Converting my 69 Mach 1 to Right Hand Drive - Australia
Looking good, you sure do work fast, I've been doing mine for 7 years and I'm still not finished!!. By the way you will probably have to drop the rack down a couple of inches if you want to install the engine and trans in one unit, the bellhousing will catch on the rack.
-
JET 445 got a reaction from bigmal in Converting my 69 Mach 1 to Right Hand Drive - Australia
Make sure you refit the kick panel air vents before you fit the dash and parking brake, otherwise it becomes very difficult- ask me how I know.....