cdanz87

Looking for a C9OF-12127-M distributor pre 1/69. Thanks Chris

Im currently working on rebuilding my pumpkin. I started to clean up the pinion support and found a crack. (see pic) on the inside. Is this something that can be repaired or should I just pitch it? Thanks for the help - Chris

Im looking to buy a pinion support p/n C5AW-4668-A. Thanks Chris

still available.

I'm looking to sell a set of ceramic coated Hedman headers. Part number is 88308. I've gone back to stock manifolds on my Mustang and no longer need these. Bolts to attach to the heads and the 6 bolts to attach to the exhaust pipes are included. http://www.hedman.com/site/?d=22&dt=108&Keyword=88308&YearID=&MakeID=&ModelID=

Do you remember what size heat shrink tubing you used for the turn signal wiring?

Thanks for the replies.

I'm in the process of rebuilding my heater box and need to replace the heater motor. It looks like most, if not all of the replacement motors have a hole in the side of them. Im just curious if anyone has used one of these and if so what did you use for a seal to plug the hole (from what I've found one isn't included). https://www.npdlink.com/store/products/blower_motor_heater_replacement_style-196006-1.html Thanks Chris

Yes

When you had the steering column apart how did you clean the inside of the tubes?