Ridge Runner

Yes ,laminated 3/16 plate inside ,only needed it in the latch area as the hinges and prop rod use1/4 inch fender clips 

Yes ,laminated 3/16 plate inside ,only needed it in the latch area as the hinges and prop rod use1/4 inch fender clips 

Remember ,the nut tightens to the right so if the clip is in wrong the clip will pop out when tightened 

There is a certain direction those clips have to be installed ,if turned  the spring the wrong side up the clip will come out when tightening 

If the clip is in correct it locks into the molding  ,the spring is a preload to keep the clip in place while tightening ,i sometimes bend the spring to keep it a bit tighter if the clip feels to loose in the molding ,now when tightening the clip is turning into the channel at top and bottom and shouldnt be able to come out 

Remember ,the nut tightens to the right so if the clip is in wrong the clip will pop out when tightened 

There is a certain direction those clips have to be installed ,if turned  the spring the wrong side up the clip will come out when tightening 

A couple of screws to hold it together and it looks like you could slip it right into place 

If the clip is in correct it locks into the molding  ,the spring is a preload to keep the clip in place while tightening ,i sometimes bend the spring to keep it a bit tighter if the clip feels to loose in the molding ,now when tightening the clip is turning into the channel at top and bottom and shouldnt be able to come out 

There is a certain direction those clips have to be installed ,if turned  the spring the wrong side up the clip will come out when tightening 

A couple of screws to hold it together and it looks like you could slip it right into place 

I have the whole interior for my 69 now.
I have had the molds for the trap door for some time ,made from a perfect 69 trap door ,it uses all the factory attachments .
I have also had the hockey sticks for a while .
The fold down latch covers came out perfect .
I even have the roll bar covers for the shelby bar ,i will be putting one in my 69 .
The piece above the trap door is finished both sides and uses the factory mounting clips 

A couple of screws to hold it together and it looks like you could slip it right into place 

A couple of screws to hold it together and it looks like you could slip it right into place 

I have the whole interior for my 69 now.
I have had the molds for the trap door for some time ,made from a perfect 69 trap door ,it uses all the factory attachments .
I have also had the hockey sticks for a while .
The fold down latch covers came out perfect .
I even have the roll bar covers for the shelby bar ,i will be putting one in my 69 .
The piece above the trap door is finished both sides and uses the factory mounting clips 

I have the whole interior for my 69 now.
I have had the molds for the trap door for some time ,made from a perfect 69 trap door ,it uses all the factory attachments .
I have also had the hockey sticks for a while .
The fold down latch covers came out perfect .
I even have the roll bar covers for the shelby bar ,i will be putting one in my 69 .
The piece above the trap door is finished both sides and uses the factory mounting clips 

First set finished ,they will be going in my 69 . I have all the other panels made and will trim them out today .

I have the whole interior for my 69 now.
I have had the molds for the trap door for some time ,made from a perfect 69 trap door ,it uses all the factory attachments .
I have also had the hockey sticks for a while .
The fold down latch covers came out perfect .
I even have the roll bar covers for the shelby bar ,i will be putting one in my 69 .
The piece above the trap door is finished both sides and uses the factory mounting clips 

I have the whole interior for my 69 now.
I have had the molds for the trap door for some time ,made from a perfect 69 trap door ,it uses all the factory attachments .
I have also had the hockey sticks for a while .
The fold down latch covers came out perfect .
I even have the roll bar covers for the shelby bar ,i will be putting one in my 69 .
The piece above the trap door is finished both sides and uses the factory mounting clips 

Mounted and waxed and they are pretty !
I even went ahead and trimmed the black pair just because .
I would like to make a pair this weekend but i dont know if i will have the time 

Mounted and waxed and they are pretty !
I even went ahead and trimmed the black pair just because .
I would like to make a pair this weekend but i dont know if i will have the time 

Mounted and waxed and they are pretty !
I even went ahead and trimmed the black pair just because .
I would like to make a pair this weekend but i dont know if i will have the time 

Trimmed . Now with a tensile strength of 1,200 lbs per square inch ,1/8 inch thick ,most back seat activities are good to go !

Trimmed . Now with a tensile strength of 1,200 lbs per square inch ,1/8 inch thick ,most back seat activities are good to go !

Trimmed . Now with a tensile strength of 1,200 lbs per square inch ,1/8 inch thick ,most back seat activities are good to go !