skidmarky

I just remove the rotor in the distributor.

https://www.roadkillcustoms.com/wheel-bolt-pattern-cross-reference/5x4.5-wheel-bolt-pattern-5x114.3mm-5x4.50-inches/
Go this off the old interweb. You can search by bolt pattern and see what vehicles use it. Might be a little outdated as the newest vehicle I see is '08.

https://www.roadkillcustoms.com/wheel-bolt-pattern-cross-reference/5x4.5-wheel-bolt-pattern-5x114.3mm-5x4.50-inches/
Go this off the old interweb. You can search by bolt pattern and see what vehicles use it. Might be a little outdated as the newest vehicle I see is '08.

03 Mach 1
 

30 years of collecting crap will get you this. Built the big garage 25 years ago, took a while but its full. Added a "mezzanine" when my company moved us out of our building, let us take anything we wanted, got a lot of cabinets, shelfs, etc.

03 Mach 1
 

03 Mach 1
 

30 years of collecting crap will get you this. Built the big garage 25 years ago, took a while but its full. Added a "mezzanine" when my company moved us out of our building, let us take anything we wanted, got a lot of cabinets, shelfs, etc.

Me either.....when I saw Randy was involved I should have scrolled by....lol

They call it the Disgustang

I agree with Barnett on the ACC carpet. I replaced my factory carpet with ACC and was not happy. Just like he said, you could see the backing of the carpet on the trans tunnel and in any area where it had a bend. I sent it back and spent a few hours on cleaning up my original carpet and reinstalled, its old but still looked better than the ACC crap.

PM me if your repair doesn't work, I have a couple e brake assemblies.

open your trunk.

I have mine in boxes just sitting on the fold down. I do have another set of interior panels laying around that have speakers mounted just like yours, plan to swap them out.

I looked for a while and couldn't really find anything "retro" looking that I liked. I ended up buying one of the din radio bezels, you then have many choices. I paid more for the bezel than the radio. I mounted speakers in boxes that sit in front of the trap door, but don't like them there. I have another set of rear interior panels that have speaker holes already, I am going to paint and install them with speakers.

There's your problem.
Get with Dan here http://www.chockostangclassicmustang.com/ super nice guy who knows his sh!t.

Who rebuilt it? Dan at Chockostang did mine and my sons '65, both work great.

yep, do the headliner next. Its really not hard. I installed mine and used binder clips to hold it in place and get it adjusted for a tight fit, then remove a clip or two, glue it, and put the clips back on. Let it sit for a day and you are done.

This is the smaller radiator, doesn't use the upper or lower brackets, bolts directly to the radiator support.

I do this also...and have hopped in the car and tried to start it a few times without putting it back in. Crank a few times and then mutter "dumba$$".... 

I do this also...and have hopped in the car and tried to start it a few times without putting it back in. Crank a few times and then mutter "dumba$$".... 

Perhaps not the easiest.. but I pull the rotor out of the distributor and take it with me... Won't stop a tow truck, but should pretty much everyone else. :)

I've got a few if you need one. just pay shipping.

Anybody going to the NSRA show in Louisville this weekend, Aug 7-10th? We will be there with my '69 Mach 1 thur afternoon til sun. morning.