jacob1969

Thanks for letting know what each the contacts are!!!!!!! Also, my ignition switch will sometimes get stuck as well, did you replace yours???

I plan on getting one this weekend; can you walk me thru it then?

The radio works great, am is the best!!!! When I replaced the circuit map and voltage regulator, I did not notice any damage to either, they just looked as old as me. I went ahead and used a test light on the cluster plug. If you number the connections 1 thru 7 on the left (#2 is empty), and 8-14 on the right the results are: with the motor running and the lights on: #6,8,9,10,14 would light up. Unfortunately I do not know what each of these correspond to. When I first bought the car 12 years ago, I believe all the gauges worked. I must admit that she has been setting untouched for about 6 years. Also, I have now discovered that my horn doesn't work either. Summary is as follows: absolutely none of the dash gauges or lights in the guages work; except the one telling me to fasten my seat belt, and now the horn has taken a crap. Any help would be super awesome

yep that is the culprit.. It plugs into the cigar lighter wiring.. I found some unattached wiring under the console.. wish me luck

Basically nothing works in the dash guage area. None of the gauges, and none of the lights for the gauages. The only thing that does work, is the light warning me to fasten my seatbelt. It is on another line and not part of the cluster. I have replaced the circuit map and voltage regulator to no n effect. I have also changed every bulb and new wiring for the temp and oil pressure sensor. What is meant by" pins are not grounded out on the metal case. " any ideas???

Does anyone have a wiring diagram for the ash tray light?? I have searched my 1969 wiring diagram book and can't find any reference to the ash tray light. It shows the cigar lighter, but not the ash tray. I have a "Grande" Any help would be appreciated. Jeff