![](http://1969stang.com/forum/uploads/set_resources_1/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
jerrywmalcolm
Members-
Content Count
33 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Calendar
Store
Everything posted by jerrywmalcolm
-
hi all, i have a 69 mach 1, i'm getting old and can't bend like i use to, i need to change the egn switch, how hard of a job is it?, i bought the switch from national parts, and i cana't even get the key cylinder to go into the main housing, probly end up letting someone else do it when i finally give up, any info out there?, thanks jerry
-
thanks for the info
-
i'm getting old, can't bend like i use to. have a 69 mach 1, fmx trans, 351w, how hard is it to change the egn switch?, just take the 4 slotted ring off and drop thru dash, is that all there is to it? thanks for any input, jerry
-
starting problems, long story. turn key on nothing happens, put on charger starts right up, 1st, i have a 69 mach 1 mustang with a fmx trans. charge for a day runs great, store for the nite and it loses charge to 12v, have to recharge. had it in a electrical shop he had it for 2 days couldn't find any thing wrong, maybe someone onthis forum will know something, o, have to add, battery is fine, no dead cell, replaced the voltage reg, thanks jerry
-
ok, didn't have any thing to do so i read up on this post about aligning the hood, i have the same problem, can press down the rear corners and it goes where it should, meaning the hinges are shot, so where can u find a set?, i would order if i knew where, thanks jerry
-
not sure, but, did someone on this forum post about getting their radio changed to fm?, thanks jerry
-
hi, in the market for a mini drill/mill machine, any one have one?, use one, need some info, price around 7 or 800, thanks jerry
-
hi, how high is the main posts?, don't look to high, maybe 6', if so, tell me more about the setup, like, who made the lift etc, thanks, jerry
-
looks like we have clown in our mist
-
ok, i have a set of new door handles, for a 69 mach 1, took the door panel off, looked, studied it for a while, i thought just a couple of screws, not quite, can't get my hand in areas, will be hard to get to the inside screw holding the door handle on, do i have to take the window out?, parts of the door [parts, it can't be that hard, but it seems like it to me, i put it back together, figured i better ask u guys how its done, thanks jerry
-
has any one installed a new set of boomarang rear side vent window trim?, is it hard to do, this is for a 69 mach 1, thanks jerry