70fastbak

Lol......:helpsmilie:

Lol......:helpsmilie:

I say let the mods begin. There is nothing particularly rare about a mach1. If you plan on driving it why not be safe while you doing so.

AMEN :punk:

Oh yeah the fit is usually terrible which im aware of, being fiberglass tho its pretty easy to fit, ive worked on a lot of shelbys and made the scoops fit perfect which they never were that great. Just a thought about the scoops, I personally think it will look pretty good. I had a scoop from a 2003 cobra which wouldn't work but I taped in place and I think it looked pretty good. Think im going to go for it, but while im making the fit nice and tight I will also fiberglass a wider lip so I can use 3m double sided tape to hold them on just like the new mustangs use. Then I can take them off if I don't like them.

Thinking about adding side scoops on my 70 fastback. I know this wont be to everyones taste but im doing a resto mod and the sheetmetal is about 70% new so its far from original. Curious if the 70 Shelby vert scoops would fit a fastback. Don't really care to much for the upper scoops that Shelby used on the fastback, I want to do lower scoops. I could fab a pair out of metal but ive got to work on other areas so id rather just buy some right now. Are the quarters the same profile on the verts?...at least the section where the lower scoop would go.

Bits n bobs....British saying. It means doing a little of this n that, lol. Being from the UK I know what ya mean man. Good luck with the car.

Looking to buy a center link for a manual steering car. 69 boss or all 70's use the bigger tie rods I believe which is the one I need.

+1 on replacing. If you already have your aprons out then its a pretty easy task. Use your export brace to locate the towers when welding them back in.

LMAO, f***** funny Bob.

How much for the speedo gauge?

This was how the finished engine compartment looked.

This was how the finished engine compartment looked.

Just ran a simple open wastegate exiting near the front wheel. I remember it used to scare the s*** out of anybody that was on that side of the car when it happened to be throwing flames, lol.

Just ran a simple open wastegate exiting near the front wheel. I remember it used to scare the s*** out of anybody that was on that side of the car when it happened to be throwing flames, lol.

Yes just a single 76mm. Was thinking about twins just for the cool factor but the single setup im going with will put a big enough smile on my smile I think. I did the same thing to my 1992 notch I used to own. That was a 351W that came out of a 1999 saleen s-351 car with a 6 speed. Heres some pics of that build.

Yes just a single 76mm. Was thinking about twins just for the cool factor but the single setup im going with will put a big enough smile on my smile I think. I did the same thing to my 1992 notch I used to own. That was a 351W that came out of a 1999 saleen s-351 car with a 6 speed. Heres some pics of that build.