SunnDogg
-
Content Count
111 -
Joined
-
Last visited
-
Days Won
1
Reputation Activity
-
SunnDogg reacted to aslanefe in Seats Need Moving Back
That dimension is about 3.5 inches on my 69 Grande with original floor and seat riser.
-
SunnDogg got a reaction from kapedVem in 69 Bench Seat
Ran across this on CL and thought someone here might have an interest. Located in the Omaha area. Not mine.
http://omaha.craigslist.org/pts/5932828476.html
-
SunnDogg got a reaction from xapedVem in 69 Bench Seat
Ran across this on CL and thought someone here might have an interest. Located in the Omaha area. Not mine.
http://omaha.craigslist.org/pts/5932828476.html
-
SunnDogg got a reaction from mapedVem in 1969 lower dash clips
Hi all,
Trying to piece together a complete dash for a 69 project and need some help identifying some of the clips. Above the glove box and to the right there are two white plastic clips about an inch apart. Can someone please let me know what these are used for and a possible source to replace them if needed? I am restoring the dash now and they are very brittle. This particular dash likely came out of a Cougar and was not certain if they are specific to that line of car as all the Mustang specific images I can find show these two square holes as empty.
Thanks in advance.
-
SunnDogg reacted to LoneWolf2U in Line Lock Installation Questions
It can be held for an extended time without problems like waiting for stoplight or traffic to clear.
But using it for parking will be a constant draw on your battery if you have it wired direct. Not wiring it direct it releases when key is off.
If you want a hyd parking brake you can plumb in a valve for that to the rear brakes.
-
SunnDogg got a reaction from JefferyPt in 1970 Lower Dash (Non-AC)
Lower dash for a 1970 Mustang without A/C. Very clean unit with zero rust. Back of unit is also clean where they typically have surface rust. $150 plus S&H. I do not have the glovebox. Located in Iowa.
-
SunnDogg got a reaction from WilliamFug in 1970 Lower Dash (Non-AC)
Lower dash for a 1970 Mustang without A/C. Very clean unit with zero rust. Back of unit is also clean where they typically have surface rust. $150 plus S&H. I do not have the glovebox. Located in Iowa.
-
SunnDogg got a reaction from JamesS in Boss 2 / big block wraparound tower retro fit
Try West Coast Classic Cougar. Most all Cougars came with wrap around towers standard and they offer good used ones for sale.​
-
SunnDogg got a reaction from JayEstes in Replacing sport mirror glass on drivers side with adj interior knob
West Coast Cougar has some in their online catalog...
http://www2.cougarpartscatalog.com/c9wy-00915.html?attribs=87
http://www2.cougarpartscatalog.com/69sprtmirlenspass.html?attribs=87
From their listing...
*NOTE* EARLY 69's USED THE 2112 MIRROR FOR BOTH PASSENGER AND DRIVER SIDES. LATE 69's USED TWO DIFFERENT SIZES FOR EACH SIDE (2124 for driver side, and 2112 for passenger side). BEFORE ORDERING, PLEASE CHECK YOUR DIMENSIONS AND COMPARE TO OUR LISTINGS.
-
SunnDogg got a reaction from 69RavenConv in Replacing sport mirror glass on drivers side with adj interior knob
West Coast Cougar has some in their online catalog...
http://www2.cougarpartscatalog.com/c9wy-00915.html?attribs=87
http://www2.cougarpartscatalog.com/69sprtmirlenspass.html?attribs=87
From their listing...
*NOTE* EARLY 69's USED THE 2112 MIRROR FOR BOTH PASSENGER AND DRIVER SIDES. LATE 69's USED TWO DIFFERENT SIZES FOR EACH SIDE (2124 for driver side, and 2112 for passenger side). BEFORE ORDERING, PLEASE CHECK YOUR DIMENSIONS AND COMPARE TO OUR LISTINGS.