mustangstofear

Dynacorn would be better off to let the customer weld the rear bumper brackets on. They never line up

We did 3 more coats of clear and now these panels are done.

You should be able to you the holes you already have. You mark the bottom side of the door where the holes are then line up the door panel. You can probably use a scratch awl to fi d the holes. We will be do the same thing shortly on Craig's.

In case you're wondering, that's the sunlight coming through our overhead door. This color will change depending on angle and light.

Looks like he has went with black. We will color sand the parts this morning, apply the stencil shoot the black and spray 3 coats of clear on everything.

Maybe a 67-68 would work.

This is a base coat, but it's very difficult to spray and should be considered a tri coat

What do you guys think the color for the 427 should be ? The customer says orange, we thing black would look good.

It's actually starting to look like a car again, excellent work.

All that's left to paint is the front and rear valance and the bumpers.

Thanks, can't wait to color sand and buff this bad boy :)

We did 3 coats of color and 4 coats of clear. We use to do 3 coats of clear, then wet sand with 600 the next day and do 3 more coats of clear. 4 coats of the new PPG clear buries the stripes fine. No need to roll the Qtrs with our mini tubs, we have plenty of room.

This is one crazy color to spray LOL

Just put some soap suds on , and they will slide right in.

Just wanted you all to know about our front suspension sale. Mini-tubs, inner fender panels, frame stiffners, new watts link (knock down version only and you must email us for this special) and full sub-frames are also on sale. If you don't want to order on line just email us and we will get back with you Monday. Have a nice weekend!

We use 3M ribbon caulk.

That's to keep water out :)

These are 2 1/16 gauges and all these pictures are on our website.