mustangstofear

The guy's weren't happy about installing Rick's Tank. It didn't fit the opening, the stainless was a pain to drill all the mounting holes, and they don't like that they have to drill holes through the floor for the lines. Plus the tank sits higher than the drop offs, which will make it more difficult to install a carpeted wood floor like we normally do.

The only part we don't make is the radio bezel.

We had to open the new one's up to run extra wires through them.

We make it in Sterling silver, which is as close as you can get. It's on our website.

My mistake, there BBK off road. I have the part # ar work, but I have posted it in the past.

We have the part # we use all the time.

The big question is how much HP do you want and what's your budget. I just priced a stock rebuild for a customer in the UAI at 3,000 with 325 -350 HP. This was with an aluminum intake and tweaking the stock heads .

I talked with guy last year at the Good Guy's show in Columbus. Had no idea that he used our one piece headliner.

Thought you guys might enjoy this mustang build.

I would go with the 351, we always stroke them to a 427. Parts are cheaper and a lot easier to work on if you're keeping the shock towers. We use JBA off road headers, and they fit great.

Windshield is in.

I did just the outside of a convertible a few years back for 7500.00. He shipped the car up from New Mexico to have me do it.

Installing our MTF Watt's link.

At 64 now , I can guarantee that's not going to happen LOL.

Slow and easy :)

Are sitting down :) 20,000 is what we charge. We have accurate time and materials to back it up.

You don't have to remove the windshield on the 69-70 to do it properly, just the backglass. On the 65-68 you do because they wrap around the pinchweld. Distinctive Industries makes a better headliner IMO.

Looks like I got the ol'e bait and switch pulled on me. He didn't use water, just dried ground up glass. Thr entire back of my shop is all sand now :( plus he never cleaned the car. The final blow was it cost more than what he quoted.

I guess I would have no intention of paying the man :)

Painted over dents :(

They didn't waste anytime getting all over it. Looks like it turned out great.

That's a monster. Now that you have semi-beach poperty, how much has the value increase :)

The hose they use are huge, and takes a monster compressor to keep up. You can't even use a normal compressor for the smallest unit they sell.

In stock and ready to ship :)

Check this out. I hired a mobile Dustless blast to do a Mustang for us. Been hauling these cars to Ft Wayne for the last 20 years. This is so nice and its even cheaper.