Steve69

My issue is with the clips that hold the molding on. I cant tell you how many times they have slipped and came loose. Or the wire pops out of the molding underneath. How are clips you received with the new molding? Steve69

I have 17x8 rims with 275 40 17 tires on the back. I want to install them on the front also. Im also running a 1" spacer. Steve69

I was thinking of giving this a try next winter. http://mmb.maverick.to/showthread.php?t=79075

Looks like there aint a heck of lot of room to get your fingers in there to bring it back either. Thanks for the info!

I was thinking the same thing.

So how did you go about taking the bow out Dave? Did you do this with the glass attached? Thanks!

Hey Guys, Have a 69 Mustang with the 70 bolt in glass. My drivers side window has been really hard to turn up and down. Took out the regulater and it seems to work good. It Turns slightly hard one way which I think is where the spring tension is and easy the other way. My window wont slide easy in the tracking. It seems like the window is to tight against the outer window seal. Is there an adjustment on the slider bars to bring the window back a bit. I loosened the adjusters on the bottom of the door but didn't seem to help on top where I need the movement. Thanks!

Mine did the same thing. It was my clutch linkage binding. I installed Heim joints and rod on both ends of the Zbar. It works really well now. Heres a pic

Here a pic of mine with the 429 hood scoop.

I was thinking of the same thing. I do have a Coil over suspension currently but even trimming the shock towers I still dont think there is going to be enough room. I think unless I win the Lotto Im going 5.0 or stroker and some type of EFI. Steve69

There summit gauges on the outer ends. The autometer tach was around $75 and the summits gauges were $40.00. I think I have maybe $150 to $180 into it. I used a pod on my console for the other two gauges. There were some intructions on the web on how to make it work. Steve69

That will work. Really Great price if it includes the comptuer. Here is a link with a lot of good info on the swap. http://www.rjminjectiontech.com/

I was looking at Keisler also. I couldn't get anyone to call me back. What was the price you paid for whole setup? How's the shifting? Thanks Steve69

Hey Buening, I haven't measured measured the voltage output. My unit is about 7 years old. I dont think they sell the one I have anymore. Ill have to do that next time I fire it up. Steve69