rm69

Do you still have access to the headliner bows?

I need a good set of 69 headlight buckets. I have a set with broken tabs so I'm looking for undamaged pieces. EDIT: I found a passenger side bucket. I now just need the driver side.

Did you end up selling your trunk lid?

I just found a set yesterday and had them shipped. I won't be home for a while to check them out but if they don't work out I'll get up with you for sure. Thanks

I finally had a chance to remove the cover on one of the 70 seats. The seat back frame wasn't drilled to mount the lever for a 69. I assumed it would be. It could probably be done though. The lower part of the mechanism for a 69 hinges on a bolt and nut that can be taken off easily. The 70 has a pin that would have to be cut out. I'm sure the conversion can be done but I also found a big crack in one of my frames so I ended up just getting 69 seats instead and being done with it.

Looking for a 69 Mach 1 driver side seat. I have a passenger seat already but would consider buying both driver and passenger if unwilling to split a set.

The driver side seat in my 69 Mach 1 is for a 70. The seat back release lever is down low next the the hinge. Is it possible to convert the 70 seat to a 69 by relocating the release lever up to the middle area of the seat back? I won't be home for another couple of months otherwise I'd take it apart and see for myself. I know I haven't seen parts for that release mechanism available....only the frames and tracks for the most part.

I'm interested in the Mach 1 Seats (Original) if you still have them. Shipping to Florida....32409.

I need a driver side seat but I'd have to have it shipped. Let me know if you'd consider shipping please.

Looking for a 69 Mach 1 shaker hood. Would also consider non-Mach 69 hood to convert to shaker.

Haha.....right on. Thanks for the info. I looked it up and that place is actually a little further south of Gainesville. I think it's west of Orlando but I'll keep him in mind.

I'll check out Wiggins when I get home. I was hoping you might comment. My wife and I actually met you a couple of years ago at a show in Pensacola. I had known about your harness business at that point and happened to see your display at the show so we stopped and talked a little bit. I live across the bay fom you in Southport. I'm going to PM you about the helicopter deal if you don't mind.

I live in Panama City, FL and I'm looking for a machine shop experienced with FE's. I have a 69 Mach 1 390 that will need to be rebuilt. Does anyone know of a shop in the Panhandle or even the north Florida area? Basically anything from Pensacola over to Jacksonville.

I'm looking for a radiator for my 69 Mach 1, 390, 4 speed, with AC. Part number should be C8ZE-L or -L1.