Jump to content

binkster

Members
  • Content Count

    6
  • Joined

  • Last visited

About binkster

  • Rank
    Newbie
  • Birthday 10/23/1957

Converted

  • Location
    seneca pa.
  • Interests
    69 mustang,grizzly 550
  • Occupation
    senior master ford mechanic
  1. my mach 1 has white buckets and no stripe.i have seen a lot of mustang buckets and only recall seeing them on the black buckets.
  2. I am not familiar with the aftermarket systems but the original systems did have leaking problems.
  3. I replaced the complete cowl panel and outer side cowl panels.i had to do some repairs on the side vent panels so at the time I removed them,repaired,and welded them back on.i was looking at cjpp web site around December and I see they are available now.oh well too late now.any way that's why I would like to get the measurements to be sure.that and there is no front end on it.quite the project!
  4. i hope i am posting this right.the measurements are taken horizontally at the top of the side vents from back of firewall back to the edge of the panel at the a post.should be around 17 to 17.5.the measurements probably wont be the same.i could just line the firewall up with the outer side cowl panels but i would like to be sure before i tac it in.i am from seneca pennsylvania.i work for a ford dealer.i will try and post some pictures when i figure out how.i have owned it since 1975.its a mach 1 and came with a 351 windsor auto.silver jade with white interior and black dash and carpet.it has sat since 1993.reasons are the usual no garage,money,junior arrived.but i am back at it with progress but slow.thanks for replying and i will try to get some pictures on.
  5. replacing the firewall in my 69.would someone have the measurement from the backside of the firewall to the edge of the vent panel by the door.measurement taken at top of vent hole and at bottom of vent hole.thanks.
  6. hi all.this is my first thread.when I figure out how to post pictures I will.i need a measurement so I can add another piece to the car.from the backside of the firewall back to the edge of the vent panel by the a post.i measured in two places.1 at the bottom edge of the vent hole.the other at the top of the vent hole.i hope someone can help me out.like I mentioned I will get some pictures on and tell a little more about the car and myself.:001_cool:
×
×
  • Create New...