Chelby-Ann

Nordic Dawn Took me awhile to find these. The attached pix will help you. I took exact measurements from this 1970 donor car for those clips. My trim fit real nice using this measurement. Don't forget to put sealant on those holes before you screw in the posts assuming that's what your using.

Hey Brian I went thru the same vibration issue as your having and did exactly the same things you did looing to the root cause. I finally removed the drive shaft from the yoke after removing the wheels, brakes and rear axels for a second time. I turned the yoke by hand and found the source of the vibration. I removed the differential and found that the pinion was not messing with the ring gear anymore after 200 miles. When I rotated the pinion shaft it felt like I was rolling my knuckles on the table. Took it to a shop for them to tell me what was wrong. The pinion bearings that I never replaced when I changed out the gears for 3.55's went bad. Had them rebuild the diff with all new bearings and seals and that solved my vibration. Good Luck.

That's good news MTF. Thanks for the update.

They are. The prevoius inquiry never got back to me

Help me out with what you describe as an equalizer piece.

Hahahaha. I'll buy you a drink next time I see ya.

Rear.

Thanks Midlife. SOLD

All OEM Make me an offer for it all. Thanks Bill

Manual

Thanks SOLD

Thanks SOLD

Drivers side lower trim piece still has the tab intact. All pieces in nice shape. The interior header Trim Molding is in good shape. Make me an offer for all Thanks Bill

Aftermarket 2 RH 1LH Make me an offer Thanks Bill

OEM Its not complete but it may be of some use to someone. Ignition Switch included. In the bag is the original oil sensor wiring. Make me an offer Thanks Bill

OEM Its not complete but it may be of some use to someone. Ignition Switch included. In the bag is the original oil sensor wiring. Make me an offer Thanks Bill

OEM Good Shape and slides nicely Make me an offer Thanks Bill

OEM in good shape Make me an offer Thanks Bill

OEM Make me an offer Thanks Bill

Aftermarket $50 for both They are for the rear quarter windows. Thanks Bill

All OEM Make me an offer for all Thanks Bill

Take a good look. Some hard to find stuff all OEM. All for $40. Thanks Bill

The steering Wheel is shot the horn ring is great condition. I cant seem to figure out how to get the ring off so as not to damage it, you get the whole thing. Make me an offer. Thanks Bill

OEM Manual Brake Pedal, Dome Bezel 2 Fender brackets AFTERMARKET 1 Fender bracket OEM Make me an offer Thanks Bill

OEM Make me an offer Thanks Bill