tonyinsandiego

My brake switch only works and lights the brakes when I hit the brakes hard. Here's a little history on the brakes: Brakes were converted to disk from drum. (I think it worked normal with drums) I went with a Baer system and added the proportioning valve. I haven't set the proportioning valve yet because I'd like to get the brake lights working correctly. It appears the brake switch is the culprit. The thing is the brake light do come on and when pushed hard. This tells me the brake switch is activating the brake lights but not when I tap the brakes lightly. Could this be a bad switch? Is there a way to adjust the brake switch to be sensitive when I hit the brakes lightly? One other note, I did the LED conversion so there's another pickle in my shenanigans. I'm sure someone has crossed this bridge and dealt with this before. I couldn't find anything in the search bar. Any suggestions? Thanks

Here is a quick question for the experts- Swapped drum brakes to disk. Used the brake system from Baer Kit# 1261074 SS After swapping out the brakes I had to change my pedal. Now the pedal is way to high. I'd like to set the pedal height to use with my foot and not my knee. Any tips or advice? Thanks

Just wondering what this will fit. I'm looking for something in a 351W size. This would make a very nice set up.