bobh67

Wanted 69-70 glove box door, Could use the cable, button and liner too (for non AC car) Don't need hinge FOUND ONE!!!!!!!!!!

Wanted 69-70 glove box door, Could use the cable, button and liner too (for non AC car) Don't need hinge FOUND ONE!!!!!!!!!!

Dynacorn is also made in Taiwan.Most stuff is Ocassionally you get Scott Drake items when you order It really is nice stuff!

Dynacorn is also made in Taiwan.Most stuff is Ocassionally you get Scott Drake items when you order It really is nice stuff!

For Sale: Pair of big block NOS rubber mount insulators and a pair of the engine block plates for 67-70 mustang $175.... Also have the big block frame mounts original OEM $120 pair

For Sale: Pair of big block NOS rubber mount insulators and a pair of the engine block plates for 67-70 mustang $175.... Also have the big block frame mounts original OEM $120 pair

I too am very satisfied with the Randall's Rack and pinion I used It even fit with a 428 in a 67 with Cobra Jet Exhaust manifolds, and a factory Z bar.It drives like a new car

On a 70 mustang AC car ,there are the 2 vertical tubes coming thru the firewall from the evaporator....Does the expansion valve screw on the upper or the lower outlet?

I have a new METAL repro one with a small bend (shipper's bobo) on the corner available for sale $50. I know they fit as the next one shipped here (same brand) fit like a glove.

Looking for a pair of 15"x7" Magnums. Must have 2 1/8" centerhole dimension and be in very good shape....Also may need a pair of 15"X8" of the same.

Send me an E-Mail and I can then send pics. bobjanhaverland@aol.com

I am interested in your manual trans. power brake pedal.I now have the bracket... Let me know how much for the pedal including shipping to eastern IA. They run about $80 in the catalogs new.Bob (563)590-7999. Send photos to :bobjanhaverland@aol.com

Must be for a 69 ....Bracket only without pedals for automatic or manual will be OK..... BUT ideal would be with power brake pedal and clutch pedal included. Let me know what you have.(563)590-7999

I have a 69 Mustangmetal lower dash unit available ,the blower and blower plenum, the outside round AC vents and many more AC parts. I finished with this car.all AC items $100......Also I have a very nice center chrome vent still available .It's price and info is listed in another previous ad here.

I thought there was a difference between 69 and 70?

I know these are hard to find as I was looking for 1 for months. Now I have an extra one. No broken parts ,works great.Some light pitting (they all do). $95 plus shipping ....bobjanhaverland@aol.com

Joseph, Send me price and a couple of pics especially on the end with the screw bracket on the underside..Thanks, Bob Send to: bobjanhaverland@aol.com

Looking for the front lower, right side, windshield stainless, trim piece. Must have a good screw bracket on it.....and on the drivers side door I need the triangular (sort of) plastic vent that screws on below the latch on the door jamb

Your mount for a complete swap consists of two pairs of parts...I have the steel mount that you will need from your car's mount area to the rubber actual motor insulator. The actual rubber insulator ,you can buy new over the counter at Advance, Autozone, NAPA or O'Reilly's etc. E-Mail me for more info: bobjanhaverland@aol.com

I have a few of them. Please E-Mail me at : bobjanhaverland@aol.com

I have an original bore 1969 351W motor avaialble.It came out of a 69 mustang.Complete waterpump to flexplate and pan to intake.Also available FMX trans and converter for same..... Motor $300...trans./converter $35 ,Pick-up only in eastern IA or I may be able to deliver it to Columbus OH to the Thanksgiving weekend Ford Super Swap for little $

That's the problem, repros DO NOT fit.I have a pair of CJ ones and NPD ones that I tried. The both have a couple of angle bends on them so as you tighten them they actually pull the top away from the tail panel and twist the bumper right up against the rear valance so much if you keep tightening them the bumper hits the valance.There are also Dynacorn ones available they too are made in Tiawan(spelling) I wanted originals...By the way I have a set coming found locally....so thanks to all

Go Redskins! Hey how much for a pair of them?

Must be undamaged and only slight surface rust .Need a pair

Are the 2 reinforcements brackets that reinforce the shaker hole trim ring painted the color of the car or satin black color or?