bobh67

Still looking

I doubt at all that the coupe ones will work. Totally different bend at the rear top of the fastback vent window plus the fastening at and around the rear 1/4 vent window is different. In my opinion, NO

I needs a complete set of radio knobs for a'69 AM radio. Thought I'd try here before the catalogs.

Its not the size of the wheel such as 15x7 and 15x8... It is the center diameter at the back. I have 1969 Magnum 500's here at the shop and they don't fit. The center hole in the back is too small dia. Same way with 1969 styled steel wheels.They don't fit either. So, what I am looking for is another brand that has a2 3/4" min rear diameter. Anyone deal with this before? Looking for something chromed,polished ,alum or ? but not black

Any recommendation on 15" wheels probably 8" on the rear and 7" on the front. I must have wheels with min. 2 3/4" diameter center hub hole. Most wheels are 2 1/4" center dia. I have Granada front spindles and that is why the bigger diameter center hole I need. Going on a '69 sportsroof.

I have the RH wood grained metal part, BUT I'm in need of the plastic panel that goes behind the metal wood grained panel and attaches to the dash with 2 screws. Must have both mounting tabs.

FOUND the PART!......I need the LH (drivers) side inner, top of door, garnish molding that screws on with 2 screws and the lock knob goes thru it for a'69 mustang... Color unimportant. Must be rust and ding free.

I have that piece already.... one on each side actually. But the ugly hinge still shows. I found out that this is the way Ford did it.About 1" on each side is suppose to show and will just be a black color on a non fold down application. Chrome on a fold down. It is just that I haven't done a non fold down car in a few years and forgot about this detail. Thanks to all that replied!

I don't have a fold down though.... I don't believe there is any chrome used on a fixed back seat?

I have the two plastic pieces at the top but my whole rear back cushion in too narrow all the way down. I have a good 1" space on each side where you can see the rear frame. My cushion measures approx. 39 3/8" at the top and my frame that the cushion/metal cushion back attaches to measures 41 1/8" at the top. Are 69-70 rear seat back cushions wider than the 65-68 ones? I know I don't actually have a 69 cushion.But I thought that they were all the same. Again I do not have afold down application It is a fixed rear seat. Can someone measure theirs?

Are there two different widths on non fold down rear seat backs. I am putting together a '69 Sportsroof non fold down car . I know the rear seat back I was going to use is from an earlier mustang but I thought they were all the same other than the actual upholstery pattern But it is not wide enough to cover the metal frame it slides down onto. I have about 2" at least (1" on each side) of the frame showing. Any help on what I need? Maybe I have a fold down rear back cushion and need a non fold down? Again I am using this in a non fold down application .Are the years different? Anyone shed some light on this for me?

In the Ford box ,No imperfections at all, Asking $225

In the Ford boxes .Excellent shape ready to install on your scoop and plug into your wiring harness. Asking $175 obo. Pics available

I sold my last one for $80.I see them at swap meets for $40-$100 Don't give up You just need to look everywhere. Cougar ones are not exact but close enough and fit for daily driver and local shows. Try Cougar sites also

I have a Lacarra hub for a 68-69 mustang. No steering wheel though

I have a red 69 GT Sportsroof,Everything new including fresh '69 351 with 3 year warranty, new rebuilt 4-speed,new 9"complete rear end with 3:25 gears.PS Power disc brakes.Car is just about finished being totally restored.Underside and all underside components detailed,fresh, and new! Will need exhaust from the H pipe back.... headliner (got) installed ....windshield and rear window(got) installed.... carpet , black door panels and black front seats (got) installed....and better tires than the rollers I have on it to move it around while being restored. Marti Report, NO rust!!! Every panel including full floors professionally replaced.Clear title All VINS match. Not sure on price. I haven't even considered selling it but it sounds like what you want.This is basically a new car! Not too (mileage wise) far from you, either.PM or E-Mail me if interested ...bobjanhaverland@aol.com

All the latch items were put in first ,then the regulator,then the glass with all but the "C" guides on it.

We went front in first into from the rear of the door,just a few weeks ago when doing both sides on my 69. Went in without any problems.

Where is a good location to pick up (switch on) power ,for an electric choked Holley carb, that I am using on my 69 mustang?

E-Mail me at: bobjanhaverland@aol.com for pics

Needs some filling and sanding.Has all but 1 mounting stud, no grill, turn lites or wiring. Asking $110

On my 69,Just finishing it up,My LO beams are good. But on my HI beam the outside light (that was on for the LO beam) goes off in HI beam mode. Is this just the bulb The bulbs are new but that doesn't always mean good. Any other help before I just try replacing the LO/HI outside bulb?

Let me continue to look. I have a few other options at this time. I will keep you in mind....... STILL LOOKING for one without broken tabs first.

Have them on one car and not another .Side by side the one really looks bare