-
Content Count
369 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Store
Everything posted by very fat and very dumb
-
My painter didn't paint the entire fender extension and I'm afraid a lot of it will be visible when the hood is open. I'm looking for a photo of the visible areas when the hood is up so I can see what I need to paint. I sold my 69 convertible that I used for Chinese blueprints and I just don't recall how much you can see. Thanks in advance. u
-
Mystery wires
very fat and very dumb replied to very fat and very dumb's topic in 1969-70 Technical Forum
Bingo, that’s it!! Thanks -
Period Correct Alternator
very fat and very dumb replied to very fat and very dumb's topic in 1969-70 Technical Forum
I think you’re right about the gold dichromate Raven. I did have it rebuilt as it was kinda nasty, turned out great. Here’s a pic of the back. No question, I posted because it may be helpful to someone in the future. -
I found a vintage alternator (on the left) in my pile of parts that came with a 69 GT Fastback I bought a while back. My research showed that this probably an original alternator. I put it next to a recently purchased Napa rebuild for comparison. Feel free to opine if you have any input. GO HAWKS!!
-
Are the orange and black wires for the radio?
-
Although this will make me look like a complete moron I think it's important to disclose what happened. I had the ground wire on the alternator connected to the stator by mistake. The harness is in the mail to Midlife so he can bail my dumb ass out. The good news is that while digging through my stuff looking for the old alternator I found what appears to be an original alternator (rounded castings instead of square), it's currently being rebuilt.
-
I have the hood striker (not the latch) , console, 1 non sport mirror, power steering bracket. What's a front splitter?
-
So I started the Mach for the first time yesterday. After a very short time the wires going to the alternator started smoking, I shut it down but it was too late. Copper is showing on both sides of the alternator wiring connector. I have a few questions. - What might have caused this? -Do I have to pull out the entire harness to figure out how much damage might have been done? - When I get the harness fixed how do I ensure this doesn't repeat itself? Thanks
-
Head Liner and window install
very fat and very dumb replied to very fat and very dumb's topic in 1969-70 Technical Forum
Thanks, the Mach is Silver Jade which is a factory color. Thanks for the info on the sail panels. -
Head Liner and window install
very fat and very dumb replied to very fat and very dumb's topic in 1969-70 Technical Forum
What else would it be? 69 Convertible which I'm planning to sell this year. We never use it. I don't plan on doing the headliner myself. Everything has to be perfect, I can do a lot of things but I'm not willing to risk it. Sail panels? Do I need to use new ones? Is that part of the headliner process? -
Head Liner and window install
very fat and very dumb replied to very fat and very dumb's topic in 1969-70 Technical Forum
Thanks for the info. So the first thing to do inside the car is the headliner? I've put in the lower dash, steering column etc. Thanks for the kind words on the car, the color is Silver Jade. -
It's almost time to start on the interior on my 69 Mach, I'm wondering if I should have the head liner installed before or after the windshield and rear window. Does it matter?
-
I live in the miserable, nauseating, rain soaked pacific northwest. I have a wood floor dovetail trailer. I treat the deck like a deck and treat it every year or two and also store it inside. After 8 years it's still perfect. The fenders are starting to show tiny bits of rust, having a steel deck would, in my opinion, rust worse than the fenders and be a major PIA unless you like fixing things that shouldn't have to be fixed. Also, my drivers side fender tilts away from the trailer so you can get in and out of your car. I'd get the 10K or 12K rated trailer and make sure you have brakes on both sides of the trailer. Also make sure you have D-rings everywhere and pick up a set of Mac's Tiedowns.
-
FREE...FMX Transmission...
very fat and very dumb replied to 3pedal's topic in Parts for Sale / Wanted
. -
Wanted 351W distibutor Oct/Nov 1968
very fat and very dumb posted a topic in Parts for Sale / Wanted
I'm looking for a dizzy with a 8K or 8L date code. -
Do you have the date codes on the exhaust manifolds?
-
Rear gear manufacturer suggestions.
very fat and very dumb replied to Mike65's topic in 1969-70 Technical Forum
Call Olympic 4x4 in Snohomish WA and get a good set of used OE gears. As far as I'm concerned everything else is garbage and I am not open for discussion on the topic, LOL.