rchappelear

So i came across this blog online and it was very useful in aiding me to disassemble my seat tracks. After they were apart i sent them out for powder coating, cleaned the nylon bushings and metal bearings. I used white lithium grease for reassembly and they move very smoothly ready for installation http://www.classicgarageblog.com/2011/02/15/1965-1970-mustang-seat-tracks-restoration/

here are a few pictures of the cover and what you will find inside

Motorbooks international authentic restoration guides Mustang 64 1/2 - 70 restoration guide ISBN # 0-87938-598-7 has alot of blow out diagrams, i have found this helpful along with chiltons for the motor and the torque specs.

So my 69 is originally a power brake auto car. I have converted it to a manual transmission with disc brakes all around. I wish to install a power booster setup. I like mustang steve's stuff, but am not thrilled about the supper large and fat bendix booster. do you have any other suggestions on a good power brake setup for a manual transmission FYI 351w stroked to 418ci quick fuel 750 cfm double pumper vic jr intake manifold afr 205 heads tko600 tranny let me know if any additional information is needed for the proper vacuum

yeah the aerosmith song "dude looks like a lady" first popped into my head, ya know but the reverse version "lady looks like a dude"

here is the controls, i do not think it is complete and is dirty

Here is the A/C Coil and Heater core

here is a few photos

I had Vacuum Orna-Metal 734-941-9100 i believe i talked with Frank

Grouping 3

The vents are in good shape, no breaks or cracks. The chrome is wore down well. The main body in in good shape, minus on pit on the upper left corner of the visual side. This needs to be cleaned up and the vents, if wanted, need to be sent out to get rechormed. I know i had my set out for $35 each (strip, plate, detail, and shipped).

group

Grouping

currently listed is the vent duct hose tubes, please refer to the ID number (k1 has wear through on the X from the factory)

I will list out with photos factory a/c parts, bear with me i have alot to upload!

Should i move this to the parts for sale listing???

All OEM parts. I can upload photos if everyone likes ryan

69-70 fastback bows as well $125 +shipping Ryan

I have for sale a moon grain finish headliner and sail panels for a 69-70 fastback. Also included is the insulation. Opened the sail panels for pictures, headliner still sealed. Forgot i had these parts and double ordered. $75 +shipping ryan

Ron Morris T5 transmission cross member for sale. Never been opened, went with a TKO600 set up instead. $120.00 + shipping Ryan

So my project is coming to an end and have extra parts that just need to go to someone else project. I have two a/c systems and plan on loading them up on ebay for sale. Do you think they would sell better as a complete unit or individually parted out??

I have two complete A/C set ups with blower fan, just cannot part out...

where did you guys buy these at? I see CJ has a ABS set and Dallas mustang has a fiberglass set. I think the fiberglass set is $25-30 more Do you think the Dynacore is the better manufacture?

what do you say is the best interior rear trim panels for the 69 mustang fastbacks seat area? should i go with original fiberglass, new ABS repos, or if they make them Repo fiberglass??? ryan

here is the photos of the bows i have. I would say $125.00 plus shipping