69 Coyote Build

[69 Coyote Build]

:cool2: Sweet!

[69 Racing mirror glass replacement]

I dropped mine off at the local glass shop. They replaced the glass, charged me about $10, done deal.

That is the easiest way I know.

Tim

 

Did the same.

[Anyone Know What This is Exactly??]

that goes behind the ign switch it illuminates the back of of it with a small bulb

 

+1. Illuminates the switch when you pull the headlight switch out to the parking lights position. Light goes out when the headlight switch is pulled out to turn on the headlights.

[69 mach 351w tach]

Maybe time for a rebuild by Tachman.

[Classic Car Rescue Show]

Yeah, and what's up with going to the junkyard and removing a 68 coupe windshield to replace the one he dropped.

[TMI Mach 1 Door Panels]

The Mustang Market was pretty nice, but couldn't get past the plastic foam backing whereas the Dashes Direct had the original-style cardboard backing.

 

The plastic backing is why I like them. Much more durable than the original style...doesn't tear from the clips when removing and replacing the panels.

[1969 Convertible V8 Single Exhaust to Dual Exhaust]

I went with the magna flow stainless 2.5" kit running long tube headers. Had to get creative going up through the tunnel over the bottom plate. Welded a 1" square tube to give me the extra room and is all tucked in nice. Sounds great I think and cant wait to open it up legally. Lol

 

Any pics of your creative mod?

[Yet another turn signal question]

Make sure the bulb sockets are tight/grounded in the housing.

[Boss 302 vs War Robot]

Cool. Did you notice the 1966 interior shots.

[Tire size for 14 inch wheels]

225/60/14 BFG Radial T/As (sig pic is not updated)

[Pieces - The 69 Mach 1]

Ouch. I feel your pain. Couple of years ago when cutting the speaker holes in my deluxe door panels with a box cutter, it slipped slicing my left thumb down to and including the tendon. Probably shouldn't have been working on the car at 1 am.

 

I wrapped my thumb with a paper towel and secured it with masking tape and drove myself to the emergency room. Had to have plastic surgery.

 

It actually hurt more when the doctor was manipulating the cut and poking around than the actual cut. Took some time before I got the feeling and range of motion back.

 

Good work/luck on the project too by the way.

[My '69 Mustang in a pop video!]

Yeah, weird alright, but great incorporation of the your Mustang.

[WTB: 69 Underhood Light]

Looking for an underhood light for my 69.

[Wiring & Light Issues Where To Start]

The key switch is designed to go on at park and off when pull to headlights.

 

Try a new headlight switch. Even though the headlights work, it affects the others too. If not that, check the ground wire connection in the harness behind the gauges.

[new to site restomod 70 mach 1]

Well done.

[69 GT fastback rockers...]

The rocker trim was available on the GT. It was part of another package that could be added. I'd leave it on.

 

Ditto.

[Clutch equalizer bar hits steering coupler in turns]

is the z-bar bent? my original was.

 

 

Not sure if it's bent. How can I tell?

[Clutch equalizer bar hits steering coupler in turns]

Non adjustable standard engine mounts. I heard conv & non-conv mounts are different, could it be that I got the wrong mounts?

 

Gearbox is a rebuilt unit.

[Clutch equalizer bar hits steering coupler in turns]

I recently reinstalled my 4-speed (had been converted to auto) and when I'm shifting (clutch engaged) during turns (turning steering wheel) my steering wheel hits/drags against the equalizer bar briefly.

 

The equalizer bar was still in the car with the auto and I replaced the engine mounts, steering box and rag joint.

 

Any ideas on the cause?

[Tyre size for 1969 Mustang GT Convertible]

Welcome to the forum Chris. From the UK? Any pics of your car?

 

I have 225x60x14 on mine and had that size on others I've had as well. I would go with that size.

[Any difference between coupe and convertible door glass size?]

Thanks for the replies guys and thanks for the link 427Stang.

[Any difference between coupe and convertible door glass size?]

Anyone able to provide a height measurement from the middle of the window for their sportsroof door glass?

[Any difference between coupe and convertible door glass size?]

I thought coupe and convertible door glass was interchangeable so I bought a passenger side coupe door glass off E-bay and when I got it found it to be shorter than the original piece by almost 2".

 

The shape and brackets (glued to it) are the same but the coupe glass I received is about 14" tall in the middle and the original convertible glass about 15 3/8".

 

Are they different or did I get glass from another vehicle?

[Help on Car Backfiring or Shutting Down While Driving]

Do you have a spacer under your carb?

 

Yes, the Ford Spacer with a 4160 Holley carb.

[Help on Car Backfiring or Shutting Down While Driving]

+1, start with the fuel filter, could be badly clogged. If not check the fuel pump next and the lines inbetween.

 

Changed the fuel pump, filter and lines in engine compartment and still have the problem. Any other suggestions?