-
Content Count
130 -
Joined
-
Last visited
-
Days Won
27
Content Type
Profiles
Forums
Calendar
Store
Everything posted by paulb
-
Hi, I gave a sheet metal shop diagrams of what I wanted and they folded to suit, I then welded them in with some tweaking, I’ve also fitted a support on the inner rockers, similar to a convertible
-
This is the only photo I have atm, wires for control box all run under the console on the trans tunnel, rear seat has a decent gap on the hump. Their encased in a zip loom protector, so if need I can open it up easily. The main battery leads run up either side of the floor
-
Hi Vic, it’s a kit that’s installed, can get them on eBay ,I mounted the solenoid towards the back of the door and attached the rod to the inside snub button rod, I ran wires inside from each side to the control box under the dash, previous post shows how I did the extra wires running from doors to pillars, only photo I can give you is of the actuators if you want
-
Just finished the stereo and boot install
-
We’ll after having it for 13 years and rebuild over the last eight,she’s finally registered and driving , it’s been a long road.
-
Rear seat / side panels and door trims back from trimmers, came up well, almost ready for the road
-
Made the tabs out of alloy so it’ll bend easily then panel bonded them to the trim while they were in place
-
Thanks, I’ve made up some brackets and have panel bonded them on today, I’ll post some pics when they dry
-
Hi all, just had my windscreen fitted, I have the clips for the lower trim but how or what connects the lower trim to the guards? And can you buy them? Thanks in advance
-
Air box finished, came out pretty good
-
Thanks, it’s getting there slowly
-
Been busy building an airbox so the boss scoop is functional and engine can have clean air, taken a while, still needs painting just trying to decide either silver or black? And finished the gauges
-
Bit of an update, side windows in, central locking in, head unit in, almost finished wiring.
-
Thankyou
-
Thanks but need to know where what each wire does? I’m replacing a gm style switch with the original one
-
Hi all, would someone have the wiring diagram for the headlight switch please or point me in the right direction thanks paul
-
Converting mirrors to power, used Toyota Corolla motors with a little modification, still have to get mirrors cut
-
headlight buckets assembled, inner trims repainted and polished, just waiting on chrome trims then I’ll fit. Seatbelt brackets made and fitted, rear retractor mounts were challenging
-
A couple more
-
They are from vintage leds, https://www.vintageleds.com/store/p9/64.5-70_Reverse%2FAmber_Turn_Lights.html , they are original casings, I fitted their led park light/turn signal board,
-
Hi mike, Sorry for the delay, here is the paint code , it is a standox paint code Platinum silber 865608 formula id 4821643 it is a Porsche colour hope this helps, it is a very nice color that has depth, mine has been flow coated which makes it look much better
-
Hi, I will post when I have it wired, at present they are only fitted in place, if I get some time I’ll try a dummy wire up to show