Fordrevhead

February 8, 2015

China happened.

Yes, I would run a drier with steel lines and run 6" drops before each coupling to collect moisture.

I haven't priced it but this looks real nice! http://www.transair-usa.com/compressed-air/compressed_air_pipe_system.php

February 1, 2015

I like that's truck AND the bed! I had a 9 foot wooden bed on my 66 Chevy with swapped out one ton axles and suspension that once hauled two pallets of concrete blocks. And also that my VW sand rail would just fit on. My dad also had a sweet home built Diamond plate bed on his 71 power wagon with 1 ton suspension.

January 27, 2015

Congrats! I think ðŸ˜—. I suppose if piles of parts are messy I should have posted pics of my attic! I have the advantage of having a 34x12' attic in my shop that is ALL Mustang parts! Currently 4+ cars worth but I am weeding it down!

January 26, 2015

It was about 10F here today... But 70F in the shop with the wood stove. Used the impact, airsaw, cutoff wheel and air chisel today no problems.

January 22, 2015

hey, where in the world did the hood scoop pics attached come from in my post above? Wtf?

January 22, 2015

Yeah I had several HF ones years ago basically explode and shoot the spring and ball bearings all over the shop.

January 22, 2015

And here's one with my "car" in the foreground lol

January 22, 2015

Well, here's one corner that I happen to have a shot of.

January 22, 2015

I've heard that the Lowes QCs are junk... Not sure who makes them.

January 21, 2015

Lol Are you buying from Harbor Freight?

Try Milton through Northern Tool or almost anywhere, Parker-Hannifin out of Canada, CEJN out of Sweden but through Global Industrial.

January 20, 2015

I built my upright compressor into a room under the attic stairs with a full size access door. The lower end of the room stores firewood in the winter and usually tires, abrasive chop saw, battery charger, etc in the summer.

Yeah even high end brass couplings are junk in 3-4 years in my shop. Reducing the number of those I have to replace might be a cost justification.

January 19, 2015

Thanks for the input. Kobalt brand?

I'm going with iron pipe but again that's not up for debate as far as I am concerned.

Ernestgaig · January 19, 2015

I've been putting this off but before Spring I'd like to hard plumb my shop including filters, regulators, etc. I don't want to start a debate over types of pipe, etc but it seems that the pricing on regulators and filters are all over the place. I want something that will last 30 years, no leaks or cracked castings, etc. Can anyone recommend the best value brands and sources out there? Thanks

December 27, 2014

Duplicolor chrome works well although years ago I did a pair of 65s in gloss white and that worked pretty well.

November 15, 2014

:smile:Got them today, packing worked great!

Good to hear! Thanks

November 12, 2014

That is correct for a 69 or 70 Boss 429. Crazy price imo

November 9, 2014

Sale pending

November 8, 2014

So... Who is the winner???

November 8, 2014

Scoop Emblems --- sold

Received! Thanks and bump for a good seller.

November 2, 2014

Sold

November 2, 2014

Yes, positive. They have the same shape and mounting and are mistakenly listed incorrectly on eBay all the time but 70 verts only have an extra raised body line in the lower quarter that continues in the extension.