Leaderboard

I made a set from aluminum long time ago for a set of wheels I had. And made a set from steel for the Magnum 500s I currently have on the car. Can't remember the alloy I used (6061 possibly) but aluminum was fine. Used whatever material I had laying around. If you find the right size of steel tubing, you do not need to remove a lot of material (especially from the inside) and should be able to machine it on a mini lathe with small passes. Or you can get 2 different sizes of tubing and slip and weld them before machining. That is what I had done with the Aluminum one, the lip was welded/machined.

Picked up another one of these things! This one is a 2006 GT with 120,000 miles on it ,black with black and red interior . These kids just keep messing them up and i just happen to have the parts to fix them good as new !already has new brakes all the way around and he just did the full front suspension . He fried the tranny but i just happen to have one here. I have everything to fix it ,even the black paint ...my new stable is growing ! Problem is i have enough parts to build one more ,damn it !

Generally speaking for an original system; the curved arm is for a 69 and the straight arm is for the 70. The brake switch fits onto the brake pedal post. The switches can be for manual brakes or power brakes. Brian

Thanks Dave, I'm working on it, but had a few setbacks. I much prefer the days when I was young and invincible... and too dumb to know better.

Visited the body shop last week, making good progress. I got my NPD Ford tooling shaker hood and am happy to report that it only needed minor tweaking to get aligned. I also have billet hood hinges, apparently they needed some tweaking, I will report back on that after I go back there on Wednesday. The current work is focused on getting my Maier Racing one piece front spoiler fitted up. That is a very nice piece of work heavy fiberglass, and fits really well. Just a few things to do and it will fit fine. I was at Carlisle Ford show this weekend, and searched for a decent 1970 hood trim piece. As you know, the NOS ones are hard to find and expensive. I did have a good friend offer to let me use his to make sure the hood and headlight trim line up correctly, will be bringing that up there to the body shop on Wednesday. I also will bring my front bumper, and the associated mounting brackets up there to ensure that they clear the spoiler/valence combination and that the bumper lines up correctly. To answer the other questions.... the car will be in the paint booth twice. The first trip will be very soon, and will be the initial prime coat over the body work that has been done. Then, out of the booth, and back into the shop to be block sanded. After that back into the paint booth do do the base coat, hood stripe, and first clearcoat. In the end we will end up with 3 layers of clearcoat. The place that is doing the work is the same shop that painted my '68 coupe. The main business is called Klassic Rides. The shop where my car is located is called GunnerZ, which is a sister business to Klassic Rides. Both are located in Newton, North Carolina. Klassic Rides painted my '68, it needed a lot of work. GunnerZ is primarily paint and body for cars that don't need an extensive amount of work. My car has been "waiting in line" for 8 months to get started. The current wait time is approaching a year. But, my '68 was painted 15 years ago, and the paint job is still flawless. PIcs below of my '68 coupe in 1967 Marina Blue Metallic, a '63 Corvette in my final color of "Sebring Silver", and the ongoing work on the '70 convertible. My guess is that I will have the car back sometime in July or August.

Thanks to all who got the site up and running again. This is a great group and we need to find a way to keep it going. Every time the site goes out, I feel like we just got kicked out of the Fraternity house and have no where else to go.... I hate being on Double Secret Probation... https://youtu.be/1tfK_3XK4CI?si=mbh_qhTDTzUe1CUa

Made a new end for the rear of the frame, made it out of square tube instead of c channel like the original ,the old one had seen better days . I drilled all the holes including the bumper bracket on the end ,i have the bumper brackets here some where.

The simplist and without mods would be that C4, if he rebuilt it correctly. While it may not be the optimal transmission, I'll all for getting these Mustangs on the road without necessarily building the perfect car.

While we're on the subject of solenoids, I would recommend to anyone who has an older Ford vehicle with the solenoid mounted on the inner fender to occasionally have someone start the vehicle while you observe the solenoid. This should be done with the ambient lighting low enough to visually observe an electrical arc if one is present, preferably at night. I had an older Mustang with the original solenoid still in it, no problems with starting at all. My Dad started the vehicle while I just so happened to be looking into the engine bay and sure enough, a large arc of electrical current ran from the housing to one of the mounting screws. After close examination I could see a small fracture had formed in the housing after about 50 years of age and heat cycling.

Many places sell brake boosters but they are the wrong ones for our cars. There are several videos by West Coast Classic Cougar on the correct boosters and where to get them rebuilt, or you can buy a rebuilt from them. I would recommend a rebuilt over a new one. He discusses the differences here also: https://www.youtube.com/watch?v=MbW_v_DdEuU&t=50s Here are some resources: 1. Boosterdeweyexchange.com 2. Chockostang is a highly recommended rebuilder of steering components and he recommends: Midwest Remanufacturing 3. The old Global West GM recommends: Karps Power Brake Service 4. Harmon Classic Brakes

Apparently, a BOT was using enough bandwidth that the system ran out of allotted bandwidth. The service provider has apparently blocked that from happening again. But yes, more money paid to the provider would allow more bandwidth to be used per month.

Hi all, I recently bought a replacement chrome strip for the front of my bonnet and being after-market rubbish it needed to be pulled in a fair bit at the center. As soon as I pulled it in with the lugs supplied, they pulled straight out of the soft metal. I thought I'd share the brackets I made which made life a lot easier and holds it in place nice and tight. I had to use a little bit of silastic to hold them while positioning. If they were 1/16" wider that wouldn't be necessary.

Pardon the crude drawing. Took all measurements from the center of the pie cuts. Meaning that 22 1/4 is from the center of the pie cut on the cuts closest to the front of the hood. It was just getting messy. Mirrored measurements are all the same. All the pie cuts are the same size, the lengths of the two sides shown are if the lines continued straight instead of curving. The shapes of the forward two cuts are different on the radius, which you can see on the photo Ridge sent. If you have to cut the underside of the hood for the turn signals, those rear two oval measurement will be different from the top of the hood shown here.

Oh...the pictures of the front spoiler make it look pretty large. That is because the front bumper is not on. I will post an update once the bumper is on and correctly fitted.

Remember ,the nut tightens to the right so if the clip is in wrong the clip will pop out when tightened

IIRC ... 140 MPH Speedometers were only used on 1969 Shelbys, so pretty much the rarest 1969-70 cluster out there. That cluster is probably worth a whole lot more than a Deluxe 120MPH 1970 Tach Cluster. May as well try and find the correct cluster and re-sell that one. Doug

Thank you and so true on what you say, done 250 miles with another 70 miles today with 30 mins traffic and loved every minute of driving her.

Hopefully it is just something bumped the bulb in the trunk. First time I ever got pulled over in my car I was 16 and dropping my dad at the airport. I got pulled over for tail light being out. I opened the trunk and it was because my dad's suitcase had bumped the bulb in the trunk and I just needed to reseat it. I am torn about getting an indoor dust only cover for my car. Maybe I should just get a good cotton sheet. My car will be in the garage but it gets dusty in there.

Machspeed, I did this a couple of weeks ago. In order, the two bolts with J-nuts at the wheel opening. The captured nut that goes in the valance from the inside, then from the outside through the bracket that attaches to the bumper. Top center of the valance, attaches to the center support with a J-nut on the support. (a couple of these I couldn't get to focus) The bolt that goes through the valance in the front and attaches to the headlight extension with a J-nut on the extension. And from the back Last is the bottom of the main support that attaches to the core support. Usually there's a J-nut on this, but the new spoiler came with a nut and bolt I used instead. No spoiler then it's definitely a J-nut. Reverse for the other side.

Ed. Good video. I did my quarter window trim about a month ago and it came out great. I also polish with the wheel spinning away from me. Avoids getting impaled by the trim if it catches the buffer wheel…..

New windshield then had it detailed, paint chips filled in, and ceramic coated. Not bad for a 10+ year paint job. And it's amazing how much a new windshield changes the look of the car.

I heated up a rod for the different sized holes. Worked pretty well.

Just wanted to confirm the caliper is on the right side. This was according to the part number. Thanks

https://fyi.boardhost.com/viewtopic.php?id=13701 Here's a link to the host hotel booking page. The official Bash is Saturday October 5th, but guys start showing up Thursday afternoon to catch up with friends. There will be updates on the MustangSteve site up until the event.

Trying to drill out those rivets in the cut up radiator brackets ,i broke off a drill bit! The metal is like drilling a lead steel mix and it grabs drill bits ,kind of like stainless steel ! After a few good cuss words ...did i say a few ? I got the last rivet out with a diamond grinder bit

This 35 truck bed is a deal at 2,200.,it is un assembled but i have built at least 4 so it no problem ,it is every piece to build a complete bed and for the same price they will ad the wood floor and stainless trim . I get a little farther along and i will order one ,this is from Mack Products and they are just like the original .

Damn. Sorry to hear that, and hope things work out for you.

Over the past few days I started making up the new fuel lines. I got the one from the fuel tank to where the inline fuel filter will be & cut a section of line that I just have to bend from the inline filter to the hole in the torque box.

Put the Mustang up on jack stands so I can get under it & start running the fuel lines.

Old switch, note exposed copper contact material New switch from EBay US parts seller UL listed industrial switch

when I did mine I wire brushed it the best i could and used a primer made just for rust. I believe it was Mastercoat series . It is sand able and u can top coat it with most any kind of paint. worked really well for me.

Repeating some of the same here. The booster shouldn't affect the switch, but maybe you got a manual switch for an auto (or vice versa)? The price difference between the two is pretty significant if I remember right. Even though it works, the booster you have will likely fail sooner than later. How soon will likely depend on how much you drive your car. Definitely watch that WCCC video to understand why, or just for all around knowledge. Brakes will still work, so no worries. And if you do decide on a rebuild of one, thumbs up for Booster Dewey.

Modified cowl panel. Tacked 1/8 rod around perimeter on the bottom, cut away the slots, tacked 1/4-20 studs on the bottom side, welded shut washer nozzle mount holes, drilled new washer nozzle holes on top, sanded, skim coat of bondo, sanded smooth, primed, wet sanded, primed again. It'll get aluminum or SS mesh and the studs trimmed if too long. I have 3 more of these if it doesn't workout.

This guy forgot about installing the fender extension moldings before attaching them to the fenders. It can be done when the extension is bolted to the fender, but I'd rather stack BBs that do that again.

Those blocks are hard to get. Been looking for my Zephyr for a while. Great find !

NPD shows the '70 System: 5210-29: use with turn downs 5210-27A: use with Mach 1 Tips There is also the concours correct option, but you need to buy all the pieces separate. Doug

Thanks, the toughest part was fabricating the exhaust pod in the rear. the stock Shelby pod is a massive restriction to flow.

Manual pitman arm is straight on my 69.

Passenger side really came out nice .a few days of drying time and i am ready to make the molds .

Sounds good to me!

I cut a slot out of a 2x4 such that the pinch weld wasn't touching the bottom of the slot. Then, I used that 2x4 with a 2 post lift when I needed to access frame rails and other areas normally used as a lift point.

I couldn't get the video to play. I've never had new gears, but I don't think shavings are normal. Are they shavings or powder like?For the price of what stuff costs today, I wouldn't put up with a loud whine. I had a set of used 3.70 gears that were very loud, and no amount of adjustment could quiet them. That rear rebound situation sounds goofy. What did Shaun say about it? Can you post pics of your car ride height and rear coil overs?

Did my tinman connectors while the car was on the body cart. I would not do it the way I did on a convertible since there is a lot of body flex, but on a hardtop I had no concerns. Outside of the floor pans and front torque boxes my car was solid and all went well.

The big day is here! Today we made sparks! Previously we drilled holes at 5/16” In the inner rocker. We are welding inside to out, as it offers much less area you have to grind on that will also be visible. We did have some exceptions back at the torque box area where we had to weld outside to in. We completed the welds on the passenger side. Truthfully, I did most of it while my son helped, but he did get in there and do some himself, but he wasn’t as confident as I was with rosette welding. We used 5/16” holes, but we could have used 1/4” holes particularly if we were welding outside to in. Our process was as such. We put epoxy primer on both the inner surfaces, including where the wells would go. We then drilled holes. We then positioned the body side back up on the car and clamped it. I took a burned up 1/4” drill bit and flattened the end to use as a scraper to remove the epoxy on off the back metal in the hole area and used it with a die grinder. Then we welded. Where you see scorch marks in the first photo was where we had drilled holes and used screws to hold it together. Turned out awesome. Still need to grind the welds flat. About 3 hours of work Pictures…

Damn I knew there would have been an easier way.

While I was in high school, i stumbled across a red 1969 Mustang Fastback for sale. The asking price was $6K and it was in pretty decent shape. The downside is that as a high school student I didn't have the $6K. But I was able to secure a personal loan from a family friend, with the agreement that I had to pay it off within 1 year. I worked my ass off that year and made the final payment just before the 1 year mark. Later that same year, I enlisted in the Marine Corps, and after several months of basic training and then technical training for my job within the military, I went home on leave and picked up the Mustang. I drove it to Virginia, and then several months later I crossed the country with it to San Diego, CA. I planned to be in San Diego for at least 3 years (I never left), so I decided to take the opportunity to go through the car, restoring and repairing what I could. Unfortunately, I bit off more than my wallet could handle at the time (hey, who hasn't with these things?), so the project ended up taking much longer than I had originally planned. So much that I eventually, and very reluctantly, decided to sell the car to an older gentlemen that was planning on finishing the restoration with his son. I have no idea what ever happened to that car, but I hope it's still on the road and not sitting in a junk yard somewhere. I always regretted selling that car, and over the years I'd looked casually at picking up another one but it never seemed like the right time. That is until last year, when I was window shopping online and found another red 1969 Mustang Fastback for just the right price. Not perfect, but not a bucket of junk either, which is exactly what I wanted. So after a few exchanges with the seller, I took a road trip to Vegas to see the car in person. I test drove it and it was like a freaking time machine. As soon as I sat behind the wheel I felt 18 again. I bought it on the spot. So that was a year ago, and I've been slowly going through the car making upgrades and improvements. I replaced the cooling system, swapped in a completed MSD system, and upgraded the stock dash instrument cluster with one from Dakota Digital. Then earlier this year I came across a local body shop that does absolutely amazing work (Sylvester's Customs). I drove out to see the owner and spent a few hours learning about his shop, his employees, and his process. At the end of the conversation he agreed to put my car on the waiting list and I couldn't be more excited! Now it seems that I'm all in on a restoration/rejuvenation. I'm not planning on going all original, since I like the idea of taking advantage of the 50 years of auto advancements since the car was launched, but I'm mostly keeping with the original look of the 69 Mach 1. I'll be using this thread to keep track of all the work that I do to the car over time. Right now I'm in the middle of swapping out the Ford 8inch rearend with a 9inch from Currie, and replacing the C4 with a Tremec TKX swap from SST. My original Mustang from high school: My new Mustang:

Where's the drool emogi when you need it.

I went to pick up my power window kit for my '70 convertible. These come highly recommended from local restoration shops. I have no affiliation with the supplier, had never been there before, but as it was driving distance, I decided to go over and pick up my window kit. What I found was a small family run business in a small town called East Bend, NC, population 620. It is located on the East Bend of the Yadkin River, near Winston Salem. The owner personally hooked me up with the right regulators, motors, and switch combination. I went back in the shop, and all of the steel parts are laser cut right there. All of the hardware was very high quality. I chose the billet switch option, which uses a chrome plated billet base for the 4-switch option I chose for my console. The kit uses brand new GM switches and harness connectors. So, if you are looking for an honest to god Made in the USA power window kit, check these guys out.

Got my laser engraved blue halo LED push button switches from a supplier in Australia. Two of the switches are for my VHX Dash, they are momentary push buttons that allow you to change the settings in the speedometer and text display. Two for the power door locks, One for the interior lights, One for my fog/halo DRL, One for the emergency override - on for my engine cooling fans, and one for the emergency override – on for my trans cooler fans My power window switches will go where the cigarette lighter is on the console box, working on that next for my interior lights

We had an extra space in our garage for the car but it was full of stuff from my dad's old house and all my hunting gear so I waited for a weekend in July when my wife was out of town and cleaned up everything and epoxy coated the garage floor. It was a lot of work but definitely worth it. I also had to sell my table saw and radial arm saw. Before: Kitchen while this was in progress (Don't tell my wife): After: I guess you could say I was nesting.