Leaderboard

https://www.acehardware.com/departments/tools/welding-and-soldering-tools/welding-rods/24760?store=03344&gad_source=1&gclid=CjwKCAjw-O6zBhASEiwAOHeGxUexKmF-3t1g7CulS-QPVDZFFF3BNHpfxkTl-m1BFmorajklEJOSzhoCAC0QAvD_BwE&gclsrc=aw.ds After looking at this more closely I'm not sure it is the one I seen in there store. The one I saw said it could be used with mapp or propane gas on the package. This one seems to lean more toward an electrode for a welder so I don't know, have to take another look when I am back in there. Well after more investigation The Bernzomatic AL 3 is what I used. I was thinking it was the Muggy but I was wrong. So I can truefully say that it works great too. Although I don't think it is any cheaper now. I think the Muggy has come down some since I bought this about 5 or 6 years ago. Was going to attach a picture but as some as said it is not working.

I get a message to "Please contact us for assistance" whenever I try to insert a picture, and get a "failed upload" notice. We all know that Ben has bigger fish to fry than this seemingly little problem. I'm happy the site is up and running again, but it's pretty useless without the ability to post pictures. I assume that this is an unintended consequence of the effort to keep the bots off the site. Perhaps all uploads have been blocked? Does anyone have some insight into this problem? Edit, it seems the only way to get a picture is via a hyperlink, but obviously you need someplace to park the pictures for retrieval.

I have used https://imgbb.com/ with success in the past.

I don't know about Phil, but I still delete a lot of bot posts.

yes, I have this issue to. I think its most likely restricted now to keep the bots at bay from posting nsfw photos or ads. Hoping we can change the site soon.

Solved! The bolts that came with the kit are too long, and hit the back of the disc.

Terry, I was in my local Ace Hardware the other day to get some welding supplys, I noticed they had another brand that was a lot cheaper. I have not tryed it but is suppose to be the same stuff. Your right about about the muggy it is great. I used it to patch an aluminum A/C condenser that sees pressures above 200psi sometimes.

I found this really interesting. Taiwan Makes American Trucks Great Again! Tour of Sheet Metal and Replacement Parts Factories (youtube.com)

Here is the Custom Bracket I made for a Summit 600 CFM M08600VS Carb. Made from a repro Boss 302 bracket (NPD # 9741-6A) and an old RACO electrical box cover I had laying around. The drop on the Boss Bracket is similar if not the same to the one RogerC posted, but I needed more drop to clear the bottom of the Summit carb. The MOD to the bracket is basically not visible or obvious once installed.