Leaderboard

I don't have any pics to post but I had to create some spacing on the backside of the bulb housings to replace what I cut off and so the bulbs sit right. I made spacers from PVC pipe, attached them to the bulb housings with JB Weld, primed with SEP then sprayed the area with spray-on rubber. They're solidly attached and not going anywhere. The headlight bowls were primed with SEP after completely coated with POR15 then top coated with KBS satin chassis black and the rims were sprayed with the spray-on rubber.

So was able to test wires and ended up being the plug was faulty so I replaced it and all works well. Thank u to all for ur help.

Hello I'm having the Christmas sale again this year. Christmas Sale 10% off all orders on in stock items November 27th thru December 5th. Enter coupon code XMAS2022 at checkout https://www.vintageleds.com/store/c2/Mustangs.html

Are they already disc brakes or are they still drums? I don't want to assume you already converted to disc because there will be a big jump in performance from manual drum to manual disc. Getting a booster installed is pretty difficult on a V8 even a 302 if the engine is still installed. You have clearance issues, new hard lines and a new brake pedal to install. None of those problems switching to manual discs. So if you don't already have them try the manual discs as an incremental step. Nothing you do will be wasted if you want to add a booster later.

Thank you, the extra space is great. It is nice to finally be getting the shop organized the way I want so I can get back working on the Mustang again.

Progress is always good no matter how slowly it goes. It's definitely more progress than I've got done.

First set is for TexasEd. They already have the proper curve and moon skin grain ,i made the light holes a bit small just incase you use the new lights ,they are a bit smaller than the originals ,a wood dowl and 80 grit paper will open them up if you need to . A strip of foam on the back side at the bottom may be needed to keep them against the hockey stick just like the card board ones have but other than that they slip in under the back window rubber and 1 screw in the front where the small molding is and paint your interior color the pinch on wind lace covers the front just like the card board ones do and thats all thats need to install .

I guess I got lucky installing my fuel sending unit. It went in easy peasy and didn't leak. Yet...