Leaderboard

Update: Working on the R quarter skin, attached with screws at the moment. Need to do some more trimming and fitting. No pics. Also working on the rh dash panel. Was trying to figure where I wanted to put my clock. I figured to add a small pod on the right side but it escalated to a symmetrical pod spanning the rh panel. Primered Clock to go on right side angled face, visible to driver. Might add a usb charge port on left angled face and a courtesy light on the bottom. Also adding 71 dash emblem on flat and offset to the right. Will probably rivet the pod to the panel when done. Cut the backside open. Wet sanded and primered again. Needs further sanding & primer.

Finished gas pedal

Have been working on making a new accelerator pedal assembly. I didn't see an easy way to clean and modify the oem piece to work with the replacement generic cable so I went down that rabbit hole and set about creating a custom pedal. I still need to put a jog in the pedal arm and trim the cable end before welding things together. Also want to add a couple of gussets to the clevis.

We’ll after having it for 13 years and rebuild over the last eight,she’s finally registered and driving , it’s been a long road.