Leaderboard
Popular Content
Showing content with the highest reputation on 01/08/2019 in all areas
-
1 point
Intake By-Pass Tube Size - C5AE9425C
69RavenConv reacted to Rich Ackermann for a post in a topic
My Password problem has been fixed! So nice to be able to log in without having to do a password reset. Thanks again bswor for your help. -
1 pointYeah, this is all in a parking lot. I wouldn't want any speed to go with it. I've seen enough of those cringy videos already. Not going there!
-
1 point
69 mach 408w build
SWPruett reacted to BuckeyeDemon for a post in a topic
thank you for the comment. the block seems fine. you'll need to finish the decks and bores . I changed to main studs so he honed the mains. I'm confident that they would have verified those regardless though. I bought it from summit. -
1 point
Meet QUEENIE.... 69 Gulfstream Aqua Build
RPM reacted to Ridge Runner for a post in a topic
I have two places on the rotating head to pin it from spinning ,i found pinning was better than a bolt because the bolt will wear into the tube ,the front hole i have pinned now is horizontal and verticle ,the hole not pinned in the rear is in different 45*degree angles . This makes less holes in one area of the rotating tubing and less chance it could break