Leaderboard
Popular Content
Showing content with the highest reputation on 01/01/2018 in all areas
-
1 point
Trunk Letters
Shep69 reacted to jholmes217 for a post in a topic
Be careful if you use an aftermarket letter kit. I bought one, and one letter was crooked due to a pin not being in the correct location on the letter. I believe it was ordered from CJ Pony Parts. -
1 point
Trunk Letters
Shep69 reacted to 69RavenConv for a post in a topic
It's been a while but I believe I filed the pins enough to get the letter straight , then used a dab of silicone adhesive to make it stick. -
1 point
Trunk Letters
Shep69 reacted to 69RavenConv for a post in a topic
Test fit them first and stand back and look at them before attaching permanently (with the nuts) -- I had a problem with one of the re-popped letters being crooked (I think it was the "N") and had to tweak things to get it straight. I also had the OEM lid with the factory holes. -
1 pointJust use the bit by twisting with index finger and thumb, don't put the bit in the drill. Be careful when pulling bit out. Needs to be spinning also. Barrel nuts need to be tight before installing the letters or letters will be come loose over a short period of time